Hi Livemusic,
Thanks for sharing your results, and glad you were able to hear the profound (indeed) differences that result from optimizing the motor-platter coupling. It's obvious when you think about it, but hearing is believing.
Of course the best implementation for any particular rig can be anything but obvious. It took us 5 years of trial and error with 10-15 belts to reach this point with this table. Some other table might need something different, though the principles are the same: no elasticity and minimal slippage.
For battery power you'll probably want the battery option from Teres. It should still be available, ask Chris. This provides the proper interface to the motor controller (internal to your Sig II) as well as a trickle charger. You could probably DIY if you had electrical skills, but I don't and apparently neither do you! Maybe someone who understands electricity will chime in with an easy DIY.
One tip: although the Teres charger disconnects itself when the motor's running, we still hear a small degradation in sound quality. A few others (not many) have reported the same. We have our charger plugged into an outlet strip with a power switch, which we turn OFF while we're listening.
For the best battery we've found (out of 5 or 6 tried), see the link I posted above.
Thanks for sharing your results, and glad you were able to hear the profound (indeed) differences that result from optimizing the motor-platter coupling. It's obvious when you think about it, but hearing is believing.
Of course the best implementation for any particular rig can be anything but obvious. It took us 5 years of trial and error with 10-15 belts to reach this point with this table. Some other table might need something different, though the principles are the same: no elasticity and minimal slippage.
For battery power you'll probably want the battery option from Teres. It should still be available, ask Chris. This provides the proper interface to the motor controller (internal to your Sig II) as well as a trickle charger. You could probably DIY if you had electrical skills, but I don't and apparently neither do you! Maybe someone who understands electricity will chime in with an easy DIY.
One tip: although the Teres charger disconnects itself when the motor's running, we still hear a small degradation in sound quality. A few others (not many) have reported the same. We have our charger plugged into an outlet strip with a power switch, which we turn OFF while we're listening.
For the best battery we've found (out of 5 or 6 tried), see the link I posted above.