2. analog
  3. 1212746417

Sumiko Headshell on SL1210

Hello folks, i have this on my deck and it does make a big difference, but here in the uk for some reason we don't get the extra counterweight it's an extra. i use an audio technica 110e with this deck and very nice it is too so i am waiting for my friendly local dealer to source me a weight, hopefully for free so by reading some of the posts here do you use blutak as i do to balance the arm or is there another method i could use. great site by the way. all the best, engine
engine
elevick
2,439 posts
 
Use a lighter cartridge while waiting? Did you try sliding the cartridge back all the way? It won't be in alignment but will work? Metal, Copper or lead washers may work?
tvad
9,467 posts
 
If you're referring to the accessory SL12xx tonearm counterweight, I believe it can be purchased through KAB.
engine OP
2 posts
 
thanks for the tips guys, i used a grado black which is 1.2 gms lighter than the at110e and kept off the cuing arm to lessen the weight and i was able to get the overhang right and alignment so all in all so far so good. i will let you know how it sounds at a later date. all the best, engine.
More to discover