Reason for buying old/classic turntables


Could you please clarify why many people buy old/classic turntable from the 1960's or 1970's? Are those turntables better than the contemporary ones? Is it just emotion and nostalgia? I'm also asking because these classic turntables are often quite expensive (like vintage automobiles and wine). Recently I saw an advertisement for the Technics SP-10 Mk II for $3,000 and a Micro Seiki SX-111 for $6,000. You can also buy a modern turntable like an Avid, a Clearaudio or Raven for that kind of money. Or are these classic turntables still superior to the modern ones?

Chris
dazzdax
Paranoia using a record brush made belt drive a non-hunter for me. A real drag, haha.
Mike is right.

Belt driven turntables have issues to overcome due to inherent belt creep that belie their apparent simplicity. That is not to say that a good belt drive cannot be made, however. As you are aware, there are several exemplary ones out there that find ways around the obstacle. The better vintage ones tend to only go with high mass to get the desired sound, however.

Direct drives require fancier electronics to pull off great sound, but when done properly, the result can be very, very nice. As noted, the really good used ones tend to be pricey.

Then, there are the idlers. Almost all of them have an immediacy that is lacking in typical offerings of the other types. Still, vintage models require a certain amount of mechanical experience to put them into excellent working order. Carry through with that, however, and you have great sound without extreme expense.

Then again, strides have been made in all the drive areas with some recent offerings. In the end, the decision has to be made by the individual who is making the purchase.
Belt drive is going to be impacted more by variables like platter mass. My Sota has a fifteen pound platter and so once it overcomes inertia it is very stable at speed. A lighter platter would be more susceptible variations in engine speed, belt imperfections,etc. An inexpensive belt drive could very well be bested by a quality DD, but like anything else its all in the quality of the execution. Theoretically DD might have advantages, but it seems belts have won out by trial and error as the better solution.

Both types of tables do still use round wheels though.
I can remember when DD was the main player, that Thorens prided itself on staying with belts, claiming that they could improve any direct-drive unit by adding a belt.
There is a quality to some of the older models, like a Thorens TD 124, a Garrard 301, a Dual 1229, a Rek O Kut 11, that just seems right. Properly set up, the deliverly of those older, idler wheel turntables is amazing, especially on solo piano. I abandoned my Linn LP12 with nearly 8k invested in mods, motors, arm etc, in favor of a Dual 1229 which I installed a Grace 747 arm on. My second choice would be to find a good Thorens TD-124. Belt drive, direct drive can both deliver good results, but their is just something about the pace, pitch and power of an idler driven table. Also, the build quality, and engineering is first rate. By far, the best listening experience I have ever had.