LAST record preservative

Marty is correct - it is reducing tracing distortion somewhat, and in doing so reduces harmonic distortion.

I've had a bottle of Last I haven't used in years. Just listened and applied it to a record. I like it and agree with Marty t. It's returning to my cleaning regimen. (and I'll have to buy a new bottle soon)

For cleaning I use a VPI 16.5, Premeir First, then Record Research Deep, then RR Wash,....now Last.

Thanks for the thread...

I have used Last record preservitive , stylus cleaner and stylast treament for years and years. I absolutely agree with Marty's statement. It does not roll the highs but removes the grain.I beleive it also states on the instructions you cannot use too much as to cause harm to the vynil. I find it works best with the stylast treament for each side of play on Lp's treated with preservitive. Best used Lp's I have purchased were from owners who used it. Understandable as anyone who goes to the trouble also knows how to handle and shelf Lp's properly. I cannot state knowledge of other products as I have not used them, I stick with what I know for me works. Cheers..................................

I`ve been using LAST for more than twenty years.Never had a problem yet

Thank you for your responses. I really appreciate all the great information and advice from you all. I am new to vinyl, so all of your experience really helps! Some of you have mentioned that by applying LAST preservative, there is a reduction in grain at higher frequencies. Would you please elaborate more, or describe what you are hearing or not hearing. I have treated several more of my used records with mixed results. I have noticed that the highs seem to be a bit better if i use the Stylast treatment with those records treated with the preservative.

Do most of you use the application brush that comes with the LAST kit, or do you use an aftermarket brush. Also, do you use the recommended amount of fluid for each application, or do you find that you need to add more fluid to the brush? It seems like the fluid visibly evaporates after a quarter of a turn on my VPI 16.5 when I use the recommended amount fluid per the instructions. Should i be repeating the application so visibly I can see an even distribution of the LAST preservative on the LP?

Thanks again for all your help and info!