2. analog
  3. 1263424723

returning vinyl for warpage?

Ok so I am kinda new to vinyl so I am not sure if I am just being too picky so here is the deal:
I purchased 2 new LPs, Beatles white, and Them Crooked Vultures. Both are double lp, and the first song or so has a noticable warp. They play fine...but it's awful nerve racking to watch the needle ride up and down over the waves LOL. I have purcased about 30 records new from the same store and never had this problem before. Since they play fine, is it unreasonable to go back and request another copy? TCV wasn't that big of a deal but the darn Beatles cost a chunk of change!

thanks for your input.
no_money
macdadtexas
1,794 posts
 
I have had 3 different versions of the 30th anniversary DSOTM and all of them have absolutely sucked. Noisey, scratched, and warped. I found a perfect 1st pressing, and although it doesn't sound as good as the parts of the 30th anniversary that were in perfect shape, it's much better on the whole because it's not warped, and doesn't have a ton of surface noise in different parts.
hifitime
715 posts
 
Don't forget when they were converting people to CD's,they said records are cheap to make and CD's aren't,that's why CD's are expensive.That was in the 80's I believe.So if records are cheap to make,they shouldn't have any problem giving us a quality product with these premium prices they're charging.
jaybo
4,478 posts
 
since there are only a handful of plants, and records are pressed in very small runs...they ain't cheap. i still think the 180/200 gram is b.s. however.
no_money OP
565 posts
 
I returned both today, no problems at all. They did not have more in stock so ordered me replacements. Picked up the last Toadies LP while there as well and it sounds awesome!
mosin
410 posts
 
"01-15-10: Curio
I use this one ..I made by myself .. one month close there and you 'll find your LP perfectly flat!

http://img9.imageshack.us/img9/3679/spianadischi.jpg"

Guys, This actually works. Of course, we aren't talking about totally trash albums, but those which won't spin on one side when placed on a non-compliant platter surface.

Curio, You really should make and sell them. A lot of guys either don't have time to make one, or aren't inclined mechanically. If you don't seize the day with this, someone else will. Let me know if you don't want to, and I'll be that guy. It is a needed item.
More to discover