VPI HW-17


I have recently re-entered the analog world, and have been using the VPI HW-17, together with a Discwasher brush and fluid, to clean my albums. This does a good job, but obviously I am not using the maching to its full potential. I am hesitant to fill the reservoir, because somehow I feel the fluid will become moldy and foul, especially in the waste reservoir. Am I being paranoid? Any recommendations on how to keep things clean?
hurricane
GC I am actually using a Rainbow vacuum it needs to be used as a self contained unit, wouldn't fit in the VPI box.Someone would have to find a good running Rainbow at a reasonable price , I got mine at a garage sale, a new rainbow motor only cost about $ 300.00 . I paid around $ 100.00 many years ago. This fix isnt cheap but it solved the empting of the water , otherwise I am happy with my VPI. If you lived near I would gladly help you with your VPI for free. David.
Hurricane,

If you are still looking at these posts I want to add something to Rushton's post. Using the Walker or AIVS to best advantage requires two cleaning wands on your VPI. The reason for this is that these are multi stage cleaning procedures where the first two stages are cleaning agents, the last stages are rinsing. You don't want to use the same VPI Wand for both so you will need one dedicated for each. I suggest you buy a tower and wand for your VPI so swapping them in and out is a quick and easy procedure.
David,

Thanks for offer, but Elinor's post has got me thinking I need to fix two problems now. I've become sick and tired of switching wands between wash and rinse cycle for every disc, not to mention all the wand water splashing around on top trying not to cross contaminate. The VPI machine simply needs to be redesigned almost completely, after all these years you'd think VPI would address these problems. They've ignored my email as expected. I guess if you're not buying a $12K tt from them then they don't care.

Does anyone here actually use the super stiff bristle brush/liquid applicator on the VPI? That pump jets out liquid like spilling a cup of coffee on the table, what audiophile actually uses that? They need to get rid of it and replace with a second vacuum wand. Perhaps I can get my engineer to customize this for me.

The only reason 'upgrading' to Loricraft/Monk/Odyssey is a non-starter is the cleaning time for a disc, basically waiting for them to 'play' every disc twice, you gotta be kidding? As a pure 78 collector I have a hunch shellac wouldn't like staying wet during the play/clean time either, so the quick vacuum clean's my preferred method.

I've come to realize in audio, if you want the real thing and are deep in historical music, you have to have it customized, and spend years waiting for design and production. A test of patience, blogging about it on forums is probably therapeutic LOL.
My garage is on a steep incline, so I'm going to lug my VPI into my tiny backyard in the cold to clean discs today. Hope the neighbors don't get pissed off at the noise.
Hi. you could put your VPI on a high spot ie: kitchen counter, get a plastic connector and add a longer piece of drain hose and let it drip into a 5 gallon pail. I could find these at the local hardware in my town . Ugly but warm solution. But we do it all for the music ! David