Yes, a friend of mine had the same problem with his P5 and purchased the KAB filter. Although any high pass filter will adversely effect the frequencies above the cutoff in the time domain, he uses Vandersteens, which are time coherent, and does not report issues. I think of this as a last resort, and in his case, it was. Nothing else seemed to work.
Woofers Gone Wild
Rega P3 with 301 arm/Sumiko BPS III. Even at lower levels, woofers in my B&W 803's are going nuts, flopping around all over the place (and I would imagine, sucking up lots of juice in the process).
Is there compliance mismatch here? From what I can tell, all should be well within the desired range. But still the woofer action.
TT is equipped with Black Diamond Racing footings, and is well placed. All adjustments on table checked/rechecked.
Am going to have a beer and not think about it for a while. Any others with this situation, or any solutions out there?
Thanks for any help,
Doc
Is there compliance mismatch here? From what I can tell, all should be well within the desired range. But still the woofer action.
TT is equipped with Black Diamond Racing footings, and is well placed. All adjustments on table checked/rechecked.
Am going to have a beer and not think about it for a while. Any others with this situation, or any solutions out there?
Thanks for any help,
Doc
- ...
- 25 posts total
- 25 posts total