getting azimuth right


I was checking the alignment and it just occured to me the the stylus was listing towards the inside of the record. The cartridge is perpendicular to the record but the stylus is not right. So... I made some some azimuth adjustments. Well, to say that their was an improvement would be putting it lightly. At first it sounded a little thin, then... The sound went from being somewhat fat to more precise, larger soundstage, blacker, tighter bass with more impact and weight. My cartridge never tracked the inside grooves of a record like this before. The sound is relaxed and natural. However, the cartridge now leans towards the outside of the record slightly, but the stylus is now perpendicular to the record. Is this unusual? The difference in horns and piano is amazing. I think I learned something today. Wow. The sound is so relaxed and not edgy and the decay.... wow. I learned how important getting azimuth right is. I can't even say how many times I have worked on getting the aligment right and fiddled with this cartridge. I just got a big payoff for my labors

I had to write this because I hope to share this info with others that may be going through what I did and to not give up on analog. I just know their has to be others that have overlooked this. How can this be? I thought the cartridge should perfectly perpedicular to the record and the whole straw on the tonearm thing. Not so. You really have to look good. The mintlp kit helped me very much in figuring this out. Now I can see how important an azimuth tool can be. I can tell there is probably some fine tuning I could do but I am excited to say the least.
tzh21y
What does the fozgometer measure? Are you going for equal crosstalk level? The fact is cartridges show a level difference between L and R. Adjusting azimuth for equal crosstalk is not a useful and accurate method.
Jazzgene - who are you asking?

Adjusting for phase 1st seems to be preferred, and even VTA appears to affect channel sep.
I was asking Stltrains as he mentioned he used a fozgometer. I am wondering what that tool measures? crosstalk?
Np. Here's a good thread on the Foz.

http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1277490686&openfrom&1&4#1
So what does the Fozz provide that a simple digital multimeter couldn't do for you? Just play a test tone in the right channel and measure the voltage in the left, then repeat the process the other way round. You want to minimize and balance the crosstalk number from each channel - right?