2. analog
  3. 1283043861

I need help with a Dual 1219 that rumbles?

I am just about at the end of my rope with this 1219. Its been to fix my Dual twice with no result. If I run the test record system noise cut(side two track 6) it makes a lot of noise (I can here it loud and clear in quit parts of the music). I have the 1219 on saw horses with no plinth and if I move the idler off the spindle of the motor while it is running my test record, viola the noise is gone. The motor mount looks good ( no cracks etc.) It obviously does not isolate the motor well enough. Anybody run in to this kind of problem? By the way the motor was exchanged so I do not think it is a bearing. Any suggestions for fixing this problem? Is this actually the way they sounded? No way with 1/2 million sold, thanks Markus
markus1
sidssp
1,077 posts
 
Have you talked to them?

http://fixmydual.com/
lloydc's avatar
lloydc
549 posts
 
Good preamps/receivers from that era often had rumble filters to compensate for the inevitable lf noise. Why intentionally damage records with an automatic? Try a used Rega.
horseface's avatar
horseface
222 posts
 
Jeff Dorgay just released issue 31 of Tone and he has a whole bit on Dual turntables titled "Fix my Dual" ... you should check it out. He specifically mentions the 1219. He has a couple of web sites listed you can go to, fixmydual being one of them.
hifihvn
943 posts
 
Does it make the same noise when its in the plinth? I think they have a spring suspension.Anyhow,when some TT's are run on something solid instead of floating on the springs, the motor does amplify itself for some reason.If you could,try lifting it up of off the saw horses if you don't have the original plinth with the spring suspension,and see if it quiets down.Of course if it does it in the original plinth,then this wouldn't apply.The idler wheel may be hard,or some other rubber parts mentioned above.
hifihvn
943 posts
 
Also if it does this in the plinth,make sure it is floating free without touching the plinth.If it is bumping the plinth,that could cause a problem too.
More to discover