2. analog
  3. 1296608189

Is centerclamp like TT Weights as good as TT maker

Hi,

I bought a used Townshend Rock 7 turntable here on Audiogon.
The first version of this model has an unthreaded spindle and no
Record clamp. Newer version of same model now has different platter subplatter bearing and threaded spindle with a center clamp.

The problem is I am being quoted $1500 to replace platter subplatter bearing and for clamp

So would a nice center clamp from TT weights that is not threaded give same sonic improvement as the threaded one from TT maker? TT already sounds awesome. I concur with great review of turntable by absolute sound dec 2010 reviewer. The dealer swears record clamp makes it better in his opinion

Thanks

Mike
radioheadokplayer
transnova's avatar
Ag insider logo xs@2x
transnova
294 posts
 
I have two of the TT weights and am quite pleased!
stanwal's avatar
stanwal
3,147 posts
 
Get something like the SOTA or Basis that does not need a threaded spindle. The Pierre Lurne is suppose to be excellent but they haven't answered my inquires. I wouldn't pay that much if you like the table as it is, just get a good clamp. Or a good record weight, they do a similar job if they are heavy. VPI uses clamps but their top table uses a weight instead.
armstrod
498 posts
 
Weights and clamps work differently and are made for different applications. If you're going to use a weight, you need to make sure it won't adversely affect the suspension of your Townsend. If it will, you'll need to use a low mass clamp.

David
buconero117
2,311 posts
 
I have the SOTA reflex clamp which I use on my un threaded tables, it works well. As we all know, all the weights/clamps have a tendency to 'bow' the record, this is especially true of the weight type.
radioheadokplayer OP
173 posts
 
While researching center clamps, I now realized that my turntable uses a tonearm dampening trough that gets within 1.4 inches of the spindle thereby allowing for only a very small center clamp (one that is less than 2.8 inches in total diameter). Most of the clamps I see available are 3 inches or greater.

mike
More to discover