2. analog
  3. 1332562213

Turntable belt/pulley help- kind of urgent

So, I got a Denon DP 300F a few weeks ago. until today I didn't have a cartridge installed, so I didn't play it. After lots of hassle, I bought and installed a Shure M97XE cartridge, aligned it, etc. Then I tried to play a record but the platter would not spin. I googled the manual, and apparently there was something wrong with the belt. So I took the belt out, rearranged it around the pulleys about a dozen different ways, and still nothing. Can someone please explain to me how to position the belt so I can get my platter working??
There's a link to the manual here: http://a248.e.akamai.net/pix.crutchfield.com/Manuals/033/033DP300F.PDF

please help! any help at all would be greatly appreciated. :) (also, I'm a noob so if I've done anything stupid but taking the belt out, etc, cut me some slack).
toxicwaterfront
blk25
31 posts
 
Phono preamp. Hopefully, somewhere hidden amongst your equipment is something called a phono preamp. (Sorry, I just couldn't help myself.). It looks like your TT may have one built in and they call it an EQ and not a phono preamp. If your TT is plugged into a phono stage on your amp, leave the EQ on the TT off. If the TT is plugged into a regular input (non-phono) on the NAD, turn the EQ on the TT on. I'm pretty sure that is the problem.
jarobertson
14 posts
 
I don't see any phono input on the back of the amp. You might need a phono preamp in between the 'table and the amp, but I'm taking a stab in the dark here since I'm not familiar with your equipment.
acman3
2,267 posts
 
Hello Toxicwaterfront, The NAD integrated has no phono stage so the input signal is to low. You will need to add a separate Phono stage or a preamp with a built in phono stage.

I would encourage you to get local help from a dealer or another audiophile as playing LP's requires a basic level of competence. I think anyone can learn this information but, at least for me, it is easier to learn by seeing.

Good Luck !
grinnell
661 posts
 
the Denon DP 300F has a built on phono stage.

"The DP-300F includes a built-in phono equalizer to connect the player to an integrated amp or receiver that does not have its own phono input."
bank738
40 posts
 
Your Denon table DOES NOT need a separate phono stage. There is a small switch under the platter that needs to be turned ON when you are playing your vinyl. Pull the platter, check the switch to confirm it is in the ON position.
Best Regards!
And, there is never a stupid question. That is what these forums are all about.
Let us know if you get it working.
More to discover