Dynavector 10x5 what is next?

 
Luxman 550 AII
Continuous Output

20W + 20W/8Ω  Class A
40W + 40W/4Ω

Total Harmonic Distortion

0.006% or less

 (8Ω at 1KHz)

0.03% or less

(8Ω from 20~20KHz)

 

Input Sensitivity /impedance

.

.

.

Output Impedance

PHONO (MM)

: 2.5mV/47KΩ

PHONO (MC)

: 0.3mV/100Ω

LINE

: 180mV/42KΩ

BAL. LINE

: 180mV/79KΩ

MAIN-IN

: 450mV/51KΩ

57mOhm

Output Voltage

RECORDER: 180mV and PRE-OUT: 1V

Signal-to-Noise Ratio

PHONO (MM)

: Above 91dB

PHONO (MC)

: Above 75dB

LINE

: Above 106dB

 

Frequency Response

Tone Controls
Loudness Control

PHONO

: 20Hz~20,000Hz (±0.5dB)

LINE

: 20Hz~100,000Hz (+0dB ~ -3dB)

 

 

Bass ±10dB at 100Hz and Treble ±10dB at 10kHz

+7dB (±1dB) at 100Hz, +5dB (±1dB) at 10kHz

Controls

Power meter, headphones jack
Recording selector
Speaker selector (A and B), stereo / mono selector
Tone controls, balance and direct line
Sub sonic filter, loudness and line phase sensor
Remote control

Electric Power Consumption

190W (on, but without a signal), 1.3W (idle)

Dimensions

18.3” (W) × 7” (H) × 17.1” (D)

Weight

48.4 lbs

 

http://www.psaudio.com/products/audio/perfectwave-accessories/gcph-phono/

I use the 17d3 with the ps audio GCPH it sounds fantastic and has plenty of gain.

Thanks for posting the additional information. I had a system similar to yours and I think you should try a cartridge upgrade first. IMO speakers and cartridges make the most significant audible difference in a system.

Best of luck finding the system that makes you happy. It looks like you picked great speakers, amp and TT combination.

Thank you jperry,
Love luxman/harbeth for analog,
I will upgrade cartridge, any suggestion?
Regards