Liquid Ceramics cables Has anyone heard these?

Again, for those above who had the pleasure of experience...how do Indra vs CT sound different? What characteristics? My system as listed:...and was wondering how replacing my Khara cables with either of the two would chg/improve the sound I get..? I mostly listen to jazz, blues, rock, fusion. Any guidance would be most appreciated. Thanks in advance!

>>I agree with everything you say, pat<<

Me too. The retailer should know which product generates the highest profit.

I guess you could call me "Mr. Cerious", Bob Grost. I wanted to clear up some questions on "cooking" CT cables. First, it will never hurt any of our cables, as each conductor can carry large amounts of current before failure. Even the interconnects are current limited by the connectors. The actual conductors can pass very high currents. So have no fears of failure. Second, even as the designer, I cannot say without question that a cable cooker will improve or add nothing to the listening process. I have clients on each side as to the question of needing no break in, including many that insist they improved over time. I, personally believe that in my experience it is the settling process of the jacket damping that affects this change, but it is an improvement, none the less. I would like to thank all who have given us the opportunity to earn your business and appreciate the civility and enthusiasm of those posting on this, and other like minded, sites.

Sincerely,
Bob Grost

Well I just talked to Bob about Cable Cooker.
Busy guy these days. He says that the use of the Cable Cooker is a good thing and is recommended and will do NO damage to his cables.
He said the confusion comes up about cable break in. He believes his cables do not require the usual long break in period so he tells people that a cable cooker is not necessary. But if you have access to one use it.

I couldn't agree more with Pat about trying to A/B CT cables. I had the occasion to disconnect part of my system on Saturday, and just that process (which included moving the CTs)resulted in the interconnects needing settling time to sound good again. It was amazing to me how much of a difference there was...very similar to what I experienced when I first received them.