Opinions on Mogami Cable?

Check out Take Five Audio, they sell all 3, cryogenic treated. I've used the 2542 for ICs and speaker cable. I've used the 3104 biwire cable for power cords (star quad w/ reverse spirol ground). Cheap prices and good sound. With cryoed Neutrik RCAs($5.pr), and 2542, you've got pretty good cables for under $20.pr! TFA also sells Canare connectors, i'm not sure about their cable. I've also had good luck with Neotech 22g, single crystal copper w/ teflon, cryoed of course.
Try building some, you'll get hooked!
Alan

I used a Mogami XLR as an interconnect between preamp and amp for a short period. While it worked, it sounded more than a little thin and metallic to me. As soon as I replaced it with a Harmonic Technology Truthlink Silver, it was obvious that it was MUCH better than the Mogami. As always, your mileage may vary, but for my money, I think it's smarter to purchase used cables elsewhere. I like Zu for about the same price as the Mogami, or for a little more Harmonic, Tara Labs or Acoustic Zen.

Good luck.

Mogami and canare are good wires. The usual marketing hype of the ""Audiophile"" cables will make any rational human crazy.
Yeah some cables are worth a few extra bucks and do change the sound... but then you might just LIKE the sound of home-made Mogami etc. (This is for all the cable nuts that will pounce on this thread after I say Mogami is just as good...sigh.)
I personally own some homemade interconnects with 1980 Mark Levinson wire, Some 1990 RadioShack 8mm pure copper wire, Some 2005 Belden teflon coax suggested by Jon Risch,... And a few Kimber AG and a few other $100 cables.
I just cannot find a use for kilobuck cable BS. (Which is rather more in line with exotic stuff in any field, where the glamour is as important as the actual usability)
And yeah, the kilobuck cables can sound better... But why bother? Spend the money on the basic equipment!!!

Mogami will definitely get the job done. Oyaide PA-02 is more refined, and still doesn't cost much in the scheme of things.

Just got some Mogami 3104 and Canare 4S11 to compare the two as speaker cables

RIght off the bat - the Mogami copper is much deeper in color. Closer to a reddish copper while the Canare is more yellowish copper.

The Canare does not claim to be OFC so this may be the reason for the color differences.

Compared to the Canare 4S11 the Mogami has more conductors and each bundle of copper is composed of 7 bundles of smaller strands.

Wednesday will be the night to listen to the Mogami and will report back.

Running these two channel to biwire Aerial 10Ts