Are DIY Cables Worth It?

Gregm, what do you have for DIY cables that may better Nordast Valhalla?

To answer your question, as in most things audio, it depends (on your components, budget, length of runs, and other factors). IME, DIY cables can give you pretty good sonics at a fraction of the cost of comparable new cables, if you want to put the time into it. As a guide, it would be my estimation that to move up significantly better than most of the well-received DIY cables, you would have to spend at least 5 times the parts cost of the DIY cables, or more. I have not heard the CHeLA speaker cable, but I do like the VH Audio power cords, and I have even tried some variations of those cords with success. The "Asylum" power cord using typical shielded SJT-14awg (typically Volex) cable is also pretty good, and the Volex 14awg cable with molded plugs (that you can buy economically through most electronics supply companies) will do better than almost all OEM power cords. For speaker cables, I have enjoyed the sound of Jon Risch's Cross Connected Belden 89259 cables, but they require a moderate amount of patience and skill to construct properly. A less expensive (and much easier to construct) alternative might be to simply purchase Canare Star Quad 4S11, connect them in a star quad configuration and terminate them with some good spades. Others like the home depot power/extension cord speaker cables, and CAT 5 speaker cables, although I would probably go for the CC89259 or Canare first. DH Labs cable also sounds pretty good, especially the Q-10 connected in a star quad configuration, and can be had used at very reasonable rates on Audiogon. The Risch interconnects using Belden cable (see his website) are good, and Chris Venhas' VH Audio fine silver interconnect has gotten excellent ratings here. Go have some fun.

Gregm, what do you have for DIY cables that may better Nordast Valhalla?

Freemand, pls note that I use the wires and prefer them in the controlled context of MY system. So, I can't say in absolute terms that the wires "are better" than Valhalla...

As to what they are: simply paralleled silver and copper conductors @~1" apart, supported by masking tape (one side only). They are UNSHIELDED which may make the ICs unsuitable for other applications.

My recommed above was to try a tested diy recipe for ICs and perhaps buy the spkr cable ready made since it looks cheaper.
Cheers

Mitch2,

I have not researched on the Vh stuff though I have seen the name tossed around some...I will have to check on that.

I made the best speaker cables for my entire 9 speaker home theater. They are suppose to compare to many high end. Google "bound for sound Marty 6 gauge". Its a six gauge that I paid 53 cents a foot recently (I bought the 500 foot spool) at Home depot. One guy told me he replaced his Acoustic zen Hologram 2 with it. The stuff brought my speakers alive. Very neutral.

The biggest thing I would like to do is put high quality stuff on all my subs. I have 3 and theres a lot of feet needed. So I have been looking at what I will do for DIY cables for those.

I've found the best cable you can do is use a solid core. Anything with strands just doesn't work nearly as well and adds it's own character or holds it back.

I ran down to home depot and bought some 14 gauge solid core wire (romex outdoor wire with the thick plastic covering it). I then put on some thick silver plated spades on the end and soldered it. Sound absolutely amazing. Much better than the $2400 MIT speaker wire I had. So much more detail and bass and imaging. I use 12 gauge solid core for the power cord. With a hubble end at the wall and wattgate at the other.

The only down side is it's extremely tough to bend. But it's well worth it. Looking at no more than $50 for a set of speaker cable. I'll gladly put it up against anything out there at any price. I used to have it all on a much higher end system but now even on my temporary system they make a huge improvement. Again I really want to emphasize solid core though (and throughout your whole system, including interconnects).