What is the best power cable under $200.00 retail?


Using:

Cambridge 840A V2
Totem Staffs
Sony C555ES SACD player

Also, will an upgraded power cable give me better sound without making any other changes? If so, what is your suggested cable for these components?
dmg
I have both signal magic power and MAC's in my system. I asked Frank to use the Wattgate terminations on the Signal Magic Powers which he did for a nominal upcharge. I really like those Wattgate terminated PC's on my amps, where the Merinco terminations just weren't snug for some reason. My guess is you would like either Signals or MACs. Whether or not you will hear a difference is an experiment you will have to run. My own experience ranges from "Wow, I can't believe this." to no difference at all. I would guess PCs might fall towards the bottom of the hierarchy of importance in putting together a system in most cases.
MAC is good way to go. I'd put a digital on the cd player...cd players seem to respond the most noticeably....however, if you don't have a dedicated line, good isolation under your gear and room treatments you're spending money prematurely....just about anything will probably sound better than the stock cords.
How about one that I haven't seen mentioned here on Audiogon? There is a DIY cord commonly called the "Audio Asylum PC" which is well-regarded on the AA forum, using Belden 19364 14-gauge wire and high-quality plugs. RAM Electronics sells the equivalent ready-assembled in the $40-$60 range, depending on length and the specific plugs chosen (I'm using their cord with Wattgate & Marinco termination). I make no claims to golden ears, but I'm very happy with the cord in my system.
Hi There:
Why don't you build one yourself? Go to the virtual Dynamics web site, and there you will find step by step instructions on how to do it. Small changes will occur to you as you assemble! It is much easier than you think. You will find a MASSIVE difference in your systems sonics. The first thing you will notice is a pronounced Bass increase. not just BOOM, but layered pleasing low low energy. They will tell you there, that terminations and wire don't matter that much! In the grand scheme of things they do! Oynaid tips and good OF copper along with silver will get you where you want to go. I would never have believed this myself if I had not tried it. You will be amazed! You can do this for less than $100. The only real expense are the plugs. There is Wattgate and many others that are more affordable than oynaid, however they are the best souning. A word on synergy here. You will find that as in audio connectors, it is best to maintain the same material and circuitry for all your gear. You will find an elevation with each Cord you replace. Go for it! By the way, stay away from ribbon wire, it is very difficult to terminate.
DR Cervantes