bi-wire vs jumpers


I'm sure the question has been asked before, but could not find it.
by bi-wire I mean a single wire terminated by four connectors at the speakers end.
if you had to choose, regardless of cost, which would you prefer, or which do you think would be more optimal in terms of signals reaching the speaker.

I was considering ordering the Crystal Cable's speaker cable bi-wire splitter instead of using jumpers.

what are your thoughts on this?
youngatheart
I have also heard that this depends on the speakers. Some may have been designed to be biwired, others less so (even though the option is available on the back of the speakers).
Depends on the internal X-over ... each is different from the manufacturers...internal part quality ... roll the dice :-)
Adding to my previous post, in this thread and this one you will find three different people reporting adverse sonic effects resulting from biwiring, specifically an objectionable reduction in bass.

Obviously though, as you can see above and in the thread I linked to earlier, it has produced excellent results for many others, while making no difference for some. As Syntax said above, "roll the dice." :-)

Regards,
-- Al
What speakers are you using? As pointed out above, some speakers, even though they have dual binding posts, are not really designed to be bi-wired. I recall reading somewhere, for example, that John Dunlavy did not recommend bi-wiring, but he supplied dual sets of binding posts to satisfy the market.

My speakers require tri-wiring; I do that with a bi-wire speaker cable and jumpers from the manufacturer of the speaker cable. Haven't done much experimenting, as I either had a single speaker cable with two jumpers or the biwire with one jumper, and the change to biwiring involved a different cable manufacturer's product. So I can't say for sure that one way is better than the other. I think Al's posts are probably the best summary of what you're going to find in these forums. If you can afford to bi-wire and your speakers will take it, I'd suggest rolling the dice with a biwire in order to relieve any angst you might have. You could then compare the speakers fully bi-wired vs. using one part of the biwiring plus a jumper and report your findings to us!
thank you all for your inputs, and the additional links to more opinions. I wasn't expecting a definite answer to it, but it's all good info. Al's comment, agreed

@Jmcgrogan2, I can only wish.

@Rcprince, the speakers are Paradigm S1v3(pbt) -(I live in a small apartment). I ordered a pair of CC Diamond Piccolo's single ended. I'll stick with jumpers for the time being, but I'm very curious about bi-wiring, and should get a set of bi-wire splitters eventually. if I do, I'll duly report my personal preference.

cheers!