Acoustic Revive RR-77 Ultra low pulse generator

I just experimented with placing 4 #1 Vibrapods under the feet of the Acoustic Revive, it really increases the performance. Pretty cheap tweak.
I would like to know what others think of this tweak.
Ozzy (System | Reviews | Threads | Answers | This Thread)

I tried this and also noticed a positive result. Happened to have a set of #2's lying around. I'm using 2 of them, not all 4. The unit is so light that it balances easily on just 2. Result is more natural sounding, decreased harshness. Bass may be a little lessened? Still, good find.

Hi guys, thank you all for sharing your experiences.

My listening room is a converted garage.
Behind the listening seat and opposite the speaker wall is
a series of shelves and closets that are covered by French doors.
The shelves are large and start 6.5 feet high to the 9 foot ceiling.

I read somewhere that the sound with an SR improves if it placed
"Into" the listening area, as opposed to placement in an enclosed space.
I have suspended my SR by getting
a long piece of hard maple and running it in the center cubby of the rear wall, so that it extends from the back of the cubby to about eight inches
into the room. I have Symposium Rollerblocks under the SR and
a piece of Indian rosewood resting on top of the unit. The unit sits
near the end of the maple piece, like a bird on a wire.
This is working very nicely, for me, and really improves SQ.

sgordon1, Thank you for your suggestion to place CDs on top of the Acoustic Revive generator, label side down, for at least 5 seconds. No one, nowhere that I have been/read, ever suggested such a thing. I started doing 10 seconds yesterday and it has resulted in a richer, more emotionally involving sound from my system. How long do you think this improvement lasts? Have you had a chance to experiment further? Thanks so much.