Make sure the exhaust fan is quiet. Not all are created equal.
Cooling Help in a Closet Equipment Room
1) I need cooling solution/suggestions.
2) Some way to make my rack swivel, or get a new one.
Well, one solution down, (move equipment to a dedicated room) and two to go. I am having an electrician wire the room in 2 weeks, which leaves me this amount of time to decide how best to cool the room. With just 5 pieces of gear in a 10 x 8 x 3 room (closet really) and NO VENTILATION now, one would not consider this a problem since this room is usually much cooler than the rest of the house. The associated gear, California Audio Labs CL-2500 series of equipment (4 items) and the Monster AVS-2000/5100.
The amp is fine in stand by, but the processor is too hot to touch, even in standby. Now granted, I have it sitting IN a Salamander rack and can move it to the top, I think I am going to move the amp to the top, and yes, I will need t have a custom top made to hold the depth of the Cal amp, leaving the SSP below. I will remove the sides of the rack and have no back to it. I can get great spacing since I have an S20 and S30 on top of each other, and may also use the S40 in there somehow. So spacing will not be an issue for ventilation.
Now, this sight, www.activethermal.com I pulled from other threads that talk about cooling a closet, but it is a fan that sucks hot air out of the room (which I can install) and have the hot air vent out of the closet to the outdoors, seems easy enough. Now, since the Cal gear runs warmer than most gear (due to the Class "A" circuity?) I would like to cool the room if possible/necessary. a) If cooling, what would one suggest, b) if not cooling, but moving air, would a fan(s) be fine?
My other question is since the closet is about 3ft wide, is there such a think like a large LAZY SUSAN I can put under the rack to make it swivel (cable and equipment swaps) and if so, where would one find such a thing? IF NOT, suggestions for a rack that does swivel?
Thanks in advance for your help!
Dan
2) Some way to make my rack swivel, or get a new one.
Well, one solution down, (move equipment to a dedicated room) and two to go. I am having an electrician wire the room in 2 weeks, which leaves me this amount of time to decide how best to cool the room. With just 5 pieces of gear in a 10 x 8 x 3 room (closet really) and NO VENTILATION now, one would not consider this a problem since this room is usually much cooler than the rest of the house. The associated gear, California Audio Labs CL-2500 series of equipment (4 items) and the Monster AVS-2000/5100.
The amp is fine in stand by, but the processor is too hot to touch, even in standby. Now granted, I have it sitting IN a Salamander rack and can move it to the top, I think I am going to move the amp to the top, and yes, I will need t have a custom top made to hold the depth of the Cal amp, leaving the SSP below. I will remove the sides of the rack and have no back to it. I can get great spacing since I have an S20 and S30 on top of each other, and may also use the S40 in there somehow. So spacing will not be an issue for ventilation.
Now, this sight, www.activethermal.com I pulled from other threads that talk about cooling a closet, but it is a fan that sucks hot air out of the room (which I can install) and have the hot air vent out of the closet to the outdoors, seems easy enough. Now, since the Cal gear runs warmer than most gear (due to the Class "A" circuity?) I would like to cool the room if possible/necessary. a) If cooling, what would one suggest, b) if not cooling, but moving air, would a fan(s) be fine?
My other question is since the closet is about 3ft wide, is there such a think like a large LAZY SUSAN I can put under the rack to make it swivel (cable and equipment swaps) and if so, where would one find such a thing? IF NOT, suggestions for a rack that does swivel?
Thanks in advance for your help!
Dan
- ...
- 12 posts total
- 12 posts total