Update:
Discovered I actually had JRiver version 18, not v19 like I thought. Wasn't sure about any new improvements I'd benefit from on v19 but, just to be on the safe side before I start downloading hi-rez files, I decided to update to v19 anyway since it was only $26.
Jerry, a computer proficient friend stopped by Sunday and, within 15 minutes, had the Oppo 105 recognized by and listed as the playback device on JRiver. So, I've reached another milestone by now being able to go into JRMC on my laptop and 'push' ripped CD files to the 105 wirelessly. Yahoo!
After having some issues with my setup(I described the setup in an earlier post) I decided to simplify connections and get things functioning and stable by taking my VTL preamp temporarily out of my system. I'll probably add the preamp back in once I determine how best to do it. I really like the combination of the VTL, with NOS Mullard tubes, and my ClassD Audio amp and want to somehow incorporate it back in.
So, after taking the VTL out, I now have the Oppo directly connected to my amp through the 105's 'dedicated XLR outputs and my amp's XLR inputs. I used a pair of Audioquest cables and prefer the secure attachment of these plugs.
The system is sounding very good under this setup but I can't honestly claim that this direct connection, or the use of decent XLR cables, improved the sound of my system when compared to all RCA cables being used. However, I did have to adjust the 'trim' level on my main speakers under the Oppo's 'speaker configuration' setup menu after noticing the 5.1 surround sound was slightly out of balance. The front left & right mains were slightly louder than the other 3 speakers. I adjusted the 'trim' to -3.0 db on both Magnepan 2.7 front mains to compensate and all is sounding very good. My theory is that the XLR cable connection method actually did lower the noise floor which caused the front mains to sound louder than the other 3 speakers that are connected via RCA unbalanced connections.
As I currently see my journey, I still have a few steps to take before I can start enjoying hi-rez WAV and FLAC music downloads:
1. Finalize my backup and storage strategy then buy and install it. Almost ready to order a Synology DS112 or Qnap TS-119P NAS ($170-180/Amazon)with a Seagate Barracuda 2 TB HD($89/Newegg) as storage and a 2TB Seagate Backup Plus($99/Amazon or Newegg)) as the backup solution.
2. Complete configuration of JRMC, including setup of Folders based on resolution. I'm currently thinking of creating 5 initial Folders: 1. my ripped CD collection in 16/44.1 2. 24/96 FLAC files. 3. 24/96 WAV files. 4. 24/192 FLAC files. 5. 24/192 WAV files. This could change as I gain knowledge of, and experience with, JRMC.
Once these 2 steps are completed, I'll finally be able to move on to the fun part of downloading and enjoying hi-rez music. My final step is finding high quality download sites at reasonable prices. I'm aware of AIX, HD Tracks and Bluecoast records.
Again, thanks to everyone on this thread and my friends, Jerry and Dave, for helping me get this far on my journey thus far.
Please let me know of any good, well engineered hi-rez recordings and/or sites you're aware of. I prefer acoustic rock, jazz, r&b, blues or really any music that is well played and recorded and portrays a 3 dimensional soundstage that gives that 'you are there'or 'they're in the room' illusion.
Thanks,
Tim