Help a 'tardo out......

You would have to use a PreAmp and by-pass it...

But I would greatly suggest to get a receiver and if you wish so, you can always use it's pre outs to get the power from external power amps. The decoding on the receiver is considerably better than the one made by the DVD.

Rgds,

Umm, I'm going to disagree a little bit with Foxtrot and Slappy (no offense, guys!). While many DVD players have built-in decoding for DD and/or DTS, many do not. It has become a fairly common feature on DVD players which also provide DVD-A and SACD playback (i.e. "universal" players). However, I checked the list of DVD players that Crutchfield currently sells (a pretty good variety of popular makes/models) and less than half provide built-in decoders.

The Dolby Digital/DTS logo on the player does not guarantee the decoder is built in. It may only pass the signal digitally for external decoding/processing. The best way to tell if the player has built-in decoding is to check 'round back for the "5.1" analog outputs. There will be six standard RCA jacks labelled "sub", "center", "front left" yadda yadda.. Or bring up the players's setup menu or check the owner's manual.

Keep in mind any player will be able to play at least one of the (several) soundtrack options encoded on the DVD. However, you will have to decode the DD/DTS soundtrack at some point if you want to enjoy discrete multichannel sound. Make sure you have the right connections on your preamp/receiver to take advantage of a built-in decoder - it is useless for discrete multichannel playback if your receiver/preamp lacks a set of proper 5.1 analog inputs. Otherwise, just use the stereo analog outs to your tv or stereo to get basic stereo sound (or even Pro Logic) as suggested above. -JZ

..Regarding the quality of decoding for DD/DTS.. Yes, you could generalize that the decoder chipset in the typical A/V receiver or pre/pro is often better sonically (or more flexible) than that found in many mass-market players, but there will be exceptions as you look into better-quality players. For example, I'd put the decoder built into the Arcam FMJ DV-27A player against any Asian receiver up to ~$3-4k (Denon, Pioneer, etc.) any day. $.02

Hey guys;I could be wrong but I thought the 5.1 outputs on the back of a dvd machine were for dvd-a or sacd music.(Some read 1 or the other/some both) Movie soundtracts sound much better with the digital out going into a processor or rec. If I'm wrong I expect I'll be told. Then it is up to your processor to read dts--if its a menu selection from the disc.

Avguygeorge

Yeah the 5.1 outputs are standard for DVD-A (not sure aboud SACD, i think there are some SACD players that only do 2 ch)

With my old reciever it diddnt have an onboard decoder. I had to buy an outboard decoder, then later on i got a DVD player that had an internal decoder and it had the 5.1 outputs which i jacked directly to the reciever.

As far as i know, if the DVD player has 5.1 outputs it does have a decoder, may or may not have SACD/DVD-a capability