Is this why my analog rig isn't so hot?


Hi All,

My system is quite decent, but...

Could it be the voltage output of my Benz Glider is too high?

My photo stage - a 47 Lab PhonoCube - could handle low outputs down to 0.12 mV. Since my Glider has a medium output (0.83 mV) - is this why I'm not that happy with my system? I seem to want to hear more, specially the top.

If I got the same Glider but with a lower output, would it make a difference? Or should I get a better cartridge? And which one?

My system:

Basis 2000 table
RS-A1 Lab arm
Benz Glider (0.83 mV)
47 Lab PhonoCube phono stage
47 Lab Chooser passive preamp
47 Lab Gaincard amp
Konus Audio Essence speakers

Thanks!
George
ngeorge
Hi Yourmama (my mom is fine and is okay with CD and LP),

Thanks for your post. If there's any flame coming your way, it won't be from me; but possibly could come from one who also owns a Basis. So, what makes this table that bad?

I'll admit that when I first bought it, I let it sit because I went into SACD and later on did more digital. Then when I came back to LP's, I sought to improve upon it. At first my rig didn't really thrill me that much, especially with the stock RB300 arm that came with it. But after I replaced it with the RS-A1, the table came to life. Became faster and livier. So here I am, trying to find ways to make it better.

Then your post came...

Would you like to tell me more about what you think of this table, the Basis 2000? What makes it not the correct one for which to build an analog system? And what recommendation do you have to really set up a truly good one?

Thanks - no hard feelings but ouch just the same!

Regards,
George
I know that they're getting great reviews in the magazines but who isn't these days? The 2000 series is highly colored, has a dark over all character with rolled off highs, very limited bass, if any at all, and anemic mids.... you can add upper bass hump to the suspended models. Most of the tables I heard came with the Graham arm and a Benz cartridge.

Mama
Sorry George,
I wrote my previous post prior to your last reply, I don't want to attack what you own, just want to give you a different point of view and something to look out for.

Unfortunately these days in the absence of many traditional well established turntable manufacturers good analog has become even more of a moving target. What kind of quality sound do you expect to get from two thin pieces of plastic or wood thrown together? Please just touch the platter and see how much play there is in the bearing and you make your own conclusions.....

Mama
Now, now. You're going to have to do better than that, Yo'mama.

You sound like one of the reviewers from the magazines. Lots of generalizations and no real specifics. C'mon, give us some comparisons between Basis tables and others, or even Basis tables with different carts and arms. Put some meat on the bones!
Dan_ed

>>You sound like one of the reviewers from the magazines. Lots of generalizations and no real specifics<<

What genralization? Please read my post again its very specific!

>>C'mon, give us some comparisons between Basis tables and others, or even Basis tables with different carts and arms<<

If you read the post again without getting emotional or defensive you'll see that I mentioned that more than a few of the Basis tables I heard came with a Graham arm and some Benz cartridge, a few had the Rega arm with some sort of modification, Denon or a Shelter cartridge.

>>Put some meat on the bones!<<

What do you want an essay of 1500 words longer? There's so little to say about something so wrong.

Mama