BEST AC CORD UNDER 1000?


anybody has any suggestion for the best AC cord on the market?
i am upgrading all my system and need a set of AC cord, i am thinking to go with psaudio lab cable or black mamba, but after doing some research the whale elite seems to be popular, any recommendation?
dynamics20
No, most of us are end users in that we actually use the products that we discuss.
There are many posts on this subject in the past,that would be good for anyone with interest to look at. Much of
what power cords...and line treatment units...and the power supplies of components are trying to do is supply a component with clean and stable power. As was mentioned
in one of these posts...RF and other airborne electronic
noise...as well as electrical appliances, etc., in a persons
home, can have impact on a component..and very much impact
what we hear in the end result. Much of this question
lies in if a person sees a power cord as a "component", as
much as the interconnects and speaker wire in there system,
or not.... A power cord in and of itself will not have a
sound of it's own, as in interconnects or speaker wire...it
is simply trying to help supply more noise free AC to the
component it is attached to. Perhaps in the fuel analogy,
it is much like Porsche and Yugo not accepting that the
fuel they are about to use is as clean as it should be...and
they use a fuel line filter...to help the situation. In the
end result what a person can or cannot hear is O.K. Unless
they are uncomfortable with someone hearing or seeing things
differently than them.... As a final, I have had good results with power cords from Wireworld and Nordost.
Whatjd: And how would any power cord supply more noise-free AC than another? Why would a power supply be influenced in any way by what power cord is hooked up to it, as long as it's delivering enough AC? Answer: it wouldn't, x2.
All wire, all metal, can act as an antenna to RF...all antenna are metal arranged in a manner to receive a bandwidth that the designer had in mind. In that same vein,
wire can be designed in a manner to reject/cancel unwanted
frequencies. The less RF and other noise introduced to
an audio components power supply or chassis give that
component an easier time in doing it's job. As in waveguide
theory....quater-wave away from an open, is a short. A powercord design can do a good or poor job at being a short
to RF...ie: an antenna..or an open/choke/block. What we're
trying to work on here isn't 110v 60cps. You'll have to
look to higher level HZ., or your own ears. But again, if
there is nothing heard in an upgrade powercord, then it
isn't worth ones money.
I am fairly new to high-end components & never knew a power cord existed other than the stock provided with the component. I used to spend weekends at the local store listening to components I could only dream of and pestering the store owner with all sorts of questions. One saturday I noticed he had this 6" diameter cord hooked up to the back of his Levinson transpot. I asked him what it was and he explained to me it was a power cord. At first I thought he was kidding but he wasn't. At first I told I couldn't see logically how a power cord could make a difference in sound quality (it just didn't make sense). Instead of explaing the logic or science behind it he said "here take it home and try and see for yourself". I hooked it up to a theta transport and immediately noticed a difference. What was amazing was after about 15 hours of listening I couldn't believe the difference. The soundstage expanded about two feet the separation was unbelievable. I immediately bought one for my transport & D/A. I hooked up a electraglide reference glide to the transport & an aural syphonics to my D/A. The combination was amazing. I guess my point & question is I went into this test with scepticism & was truly amazed at the noticeable difference. If expensive power cords are not supposed to work that much better than stock cords, what else could have caused the difference I heard?