How do you get past the pops and hiss of LPs?

You will find that, with proper VTA, which is the angle at which the stylus meets the record, the surface noise will be presented in a different plane than the music. For many, though not all, of us our sensory gating mechanisms can easily tune this out. Contrast this with the CD, where the noise actually exists within the fabric of the music.

Kevin,
You don't have to get a multi-kilobuck analogue rig to have your records sound quiet.
I set up to my nephiew an analogue with cheap Dual turntable $20 from ebay, $20 Audiotechnica cartridge bought new right after the turntable, "amputated" auto return mechanizm to make it manual... $1 Records he's got from the different garage sale basements sound increadible with no clicks noise and pops.
He's now using RadioShack battery-powered phonostage. Overall the analogue setup was less than $100 including phono. To beat this setup you should realy get CD-player above $200 used or $400 new. Having Thorens table it's more than possible to bring it back alive with carefull cartridge and arm setup. Go to www.turntablebasics.com, examine your cartridge's condition or better-off replace it for any descent new one since cartridge ages when it's not played. I'd recommend looking-up www.turntablebasics.com for proper setup.

My poor reputation having no doubt preceded me, I will refrain from commenting on this provocative topic.

Surface noise can be minimized by careful cleaning, and care of the records, but it will never go away completely. Some people learn to listen through it, while others (like me) find it distracting. CD's are the best answer.

There were various electronic devices that tried to reduce record surface noise. Phase Linear (Carver) made a dynamic multiband noise filter (Autocorrelator) which was very clever and fairly effective. There were also "Pop and Tick" eliminators.

Only one approach really worked...DBX records. However this was a compression/expansion dynamic range control system (similar to the system used for tape recorders) that required specially processed records to be played back through their electronics. It failed in the marketplace because too few records were available, and CD's came on the scene. I picked up the electronics and a dozen or so records for $25 just to see how it worked, and I was greatly impressed. Not only was surface noise completely eliminated, but the more uniform groove modulation of the compressed signal did wonders for performance of the phono pickup.

i politly disagree, i believe noise can eliminated. i rarely hear noise on lp's. many are used and i might hear a few pops or ticks on 1 out over every 5 or 6 lp's i play. the proper turnatable, arm and cartidge, and thorough set-up can get you there. even if you are using a lesser set-up now, look forward to the day you can hear the amazing quality of music that only an lp can offer.