How do you get past the pops and hiss of LPs?


I have recently got out my dad's old Thorens TT (TD 150 MKII) and listened to some of his old classical LP's. I think that it is a warmer sound than CD but I can't get passed all the noise. I asked my Dad and he said it always sounded that way. Am I doing something wrong? Do you just ignore the hiss and pops? Thanks in advance.

-Kevin
kemp
Surface noise can be minimized by careful cleaning, and care of the records, but it will never go away completely. Some people learn to listen through it, while others (like me) find it distracting. CD's are the best answer.

There were various electronic devices that tried to reduce record surface noise. Phase Linear (Carver) made a dynamic multiband noise filter (Autocorrelator) which was very clever and fairly effective. There were also "Pop and Tick" eliminators.

Only one approach really worked...DBX records. However this was a compression/expansion dynamic range control system (similar to the system used for tape recorders) that required specially processed records to be played back through their electronics. It failed in the marketplace because too few records were available, and CD's came on the scene. I picked up the electronics and a dozen or so records for $25 just to see how it worked, and I was greatly impressed. Not only was surface noise completely eliminated, but the more uniform groove modulation of the compressed signal did wonders for performance of the phono pickup.

i politly disagree, i believe noise can eliminated. i rarely hear noise on lp's. many are used and i might hear a few pops or ticks on 1 out over every 5 or 6 lp's i play. the proper turnatable, arm and cartidge, and thorough set-up can get you there. even if you are using a lesser set-up now, look forward to the day you can hear the amazing quality of music that only an lp can offer.
You can pretend you are listening with a big roaring fire in the listening room.

Charlie
If the records are permanently damaged, no cleaning will bring them back to life. If the records are properly cleaned and your vynil rig / phono section is of good quality and properly set-up, surface noise is not a problem at all. A decent linear tracking table, even a mass produced direct drive model, will make this fact oh-so clear to you. Pivoted arms are harder to work with in terms of cartridge geometry and more likely to be misaligned, doing further damage to the record with each playing. Sean
>