Power cords


Is there any truth to the following which, as you can tell from the quotation marks, is not my brainchild (my brain is childless...). I picked it up from the site of a well respected amplifier manufacturer and trust I am not committing some sort of legal or moral transgression by reproducing it here:
"When you plug your power cord into the wall outlet you are in 'SERIES' with all the wire on the other side of the wall all the way back to the power source. The small length of power cord from the wall to the amp is insignificant compared to the miles of wire it is connected to. As long as the power cord can deliver the current and voltage required to drive the amplifier to full power it is as good as it can get."
pbb
I doubted. I tried with the option to return. I was convinced. I added another with the option to return. I was convinced. It is certainly worth a test drive.
The only measurement that is truely relevant to this discussion (and that is almost never performed because of its cost) is a statistical analysis of a psycho-acoustic experiment properly designed and executed. All our electrical test equipment only gives us a hint of what our ears and minds are capable of perceiving. -- And yes I have an MA in psycophysics specializing in acoustics. That leads me to believe that anecdotal evidence, based on perception, even without an experiment is worth paying attention to. In fact, I would guess that many designers of high end equipment base what is unique about their designs, in the final analysis, on listening rather than electronic measurement (what good is it if you can measure it but cannot hear it).

I don't mean to suggest that we haven't learned a lot from these imperfect measuring tools or the mathematics that go with them. I'm a strong believer in correcting room anomolies as much as possible and even use digital eq to good effect (so much better than the old filter approach). But ultimately we're talking about music/sound which is perceived by a listener, and the listener is what counts.

What I find strange about many of these kinds of discussions, is that participants often pit electronic measurements against human anecdotal evidence. If your skeptical about anecdotal evidence, the answer isn't to turn to a useful but imperfect machine but rather to properly perform psycho-acoustic experimentation.
I can't see (hear) where scientific measurement matters. For example: This thing has gone on with string instruments. People have made hundreds of scientific measurements and made perfect copies of Stradavari instruments. They still don't sound as good even though scientifically on paper there is no reason why they shouldn't be as good. If they could reproduce them, they would be massed produced by now in China, and be available for 5 easy payments of $19.99 on the home shopping channel.
Power cords act as antenna to RFI and EMI. The ones that are specifically designed to reduce those influences, through cable geometry and shielding, can improve the sound over cords that don't pay attention to it. That's why the 'last six feet' of wire can matter. Now if there isn't a lot of RFI/EMI in the first place in your environment, or if your system has a lot of noise in it anyway, well then, you may not notice much difference.
I'm sorry, but anyone who doesn't have direct and empirical experience on this subject should not be posting on this subject. I don't want to hear about your "scientific measurements" without at least some attempt at a real scientific method, which should require actually listening for yourself. Please, just try. It's easy and cheap enough to pick up some quality off the shelf shielded cable (belden 83802..) and a couple of quality connectors (really, any brand's hospital grade..) then sit back and listen.. huh.. sounds good! better then the stock cable! WHY does it sound better? I DON'T CARE. it just does. In the end, we're talking about MUSIC reproduction, and nothing else really matters.