VPI Scout


I picked up a Scout saturday.(my wife gave me the thumbs up) It has a Benz Micro Glider high output cart. Did I do good? The uni-pivot arm is really scary, but I'm sure I'll get used to it.
Am I set for a few years with the TT cart combo? Right now I am using the Creek MM phono stage, (which I feel is under rated) but I am planning on adding a phono stage to my BAT VK31SE. Any other advise from VPI owners?
I am excited about this purchase, but I can't talk to any of my freinds about it. They think I am already crazy for getting into this expensive hobby. They just don't understand my(our)obsession. At least my wife is accepting, her nickname is "the saint".
Jeff
jdodmead
Does the VPI Scout have the means for adjusting the rotational speed of the record via placing the drive belt on different parts of the pulley, for 33 AND 45?

If this is the case, how much speed variation is available, and in what increments (approximately)
Yes - 33.33 and 45 only. Any further increments will require an SDS or similar motor controller
How many adjustments can you make with each speed, and do you know the approximate amount of change with each adjustment?
The Scout allows one to switch between 33.33 and 45 rpm by moving the belt. There is no means to adjust the speed +/- 33.33 or 45. The AC motor and the precision ground pully will give you each speed with a high degree of precision. If you want to be able to adjust the speed +/- (to change the pitch of instruments on the recording, for example), you will need to add a motor controller that varies the AC frequency being provided to the motor. One solution would be VPI's own SDS motor controller - it is almost infinitely variable and gives the added ability to change the speed to 78 rpm.
My mistake. I was under the impression that the Scout (or Scoutmaster) allowed a small incremental change in pitch, slightly +/- 33.33 and 45rpm.