Are the Empire Turntables any good?

My 598 worked well for many years. The arm was also fine (for a pivoting design) with Shure V15 pickup. The antiskating and VTF adjustments were easy and effective.

I had 2 different 598's-beautiful to look at, but don't dare walk when being used.

Robbyg...That's funny. Mine was quite immune to vibration. I credited the balanced arm (downforce by a spring) mounted on a softly suspended subchassis with the platter so that they moved together. Mine was located in a solidly constructed alcove, with a heavy wood lid that closed over the audio equipment. (No wimpy plastic dust cover!)

I am told that the phono pickup can make a difference also.

I have had a 598 for 20+ years. After installing inserts for 1/4 x 20 threads in the bottom of the base and mounting Black Diamond Racing cones, the table rests on a solid maple platform. The performance went to another level after this. A Goldring 1042 has been a great match for the arm. On well recorded lps, it gives my Cambridge Audio player/transport - Asemblage 2.7 platinum dac playback system a solid run. It's a very quiet table. However, the interconnect cable is a potentially weak point. The connector to the tonearm is a weird impossible to find plug. Make sure to get a cable in good shape. Drive belts are also hard to find.

Have a 598, highly modded, with a rare 498 on the way I just grabbed on eBay for $102.50! It seems these tables are oft overlooked, unappreciated after a decade or two of marketing-driven Linn LP12 domination followed by newer iterations of hi-po tables like the Teres. No claims here that they're "better than" other tables, but surely Empires can be tweaked to sound very nice, and look more like what most people would think of as a classic beautiful table than almost anything else. BTW, the 498 preceded the 598 and has a solid, heavier platter within similar 3-point suspension, belt-driven system. Each has an excellent Pabst motor. I plan to figure out a way to put a good-to-excellent arm on the 498 w/ Denon or Shelter MC cart. My current 598 has, briefly: stiffened plinth raised on 3 brass feet, DIY vibe-damper for the motor, and stock arm modded with: DIY counterweight modeled on Expressimo Heavyweight, VTF and AS springs removed with static VTF and HI-FI tweak offset for AS effect, plus one-piece Discovery Cable rewire with Denon DL-103D cart.