Clean Power


Here's a question I hope somebody can answer. I'm currently rebuilding all of my power cords with Wattgate audio grade (blue-star) IEC connectors and plugs and cable from VH Audio. I also want to run a dedicated line from the breaker box in the basement to the living room for the system. I want to use a hospital grade (green-dot) recepticle for this. I need to run about 60-70 feet for this.
If I'm taking the time to get quality cables and connectors I want to do it right. What do I run from the breaker box to the living room? I'm sure there is something better than getting "Romex" from the hardware store. I want to minimize the weak links so I really could use some help. I thought about running 10-2 or 12-2 in metal conduit and running an isolated ground outside the conduit but I don't know if that would do anything for me. Is there anything that is worth the work?
Currently I'm not using any line conditioners, but thats going to change soon. Does anyone have any suggestions on what to do? Are there any breakers that work better than others for audio applications?
I am using Martin Logan CLSIIs, Chiro reciever by Kinergetics, Luxman CD player and a VPI turntable with a Grado cartridge. Only a small part on my listening is for home theater. After all, I'm only using a 2-channel system
msilin
Msilin,

I have experimented over the last 1.5 years with various wires to use for dedicated 20-amp circuits. I have the following wire in use in no special order:
1) 10 gage Romex
2) 10 gage UV
3) Belden 83802 (12 gage)
4) Virtual Dynamics 10 gage BX Cryogenically treated with Cryoed circuit breaker. *

I have not tried the following but I’m sure it works, 10 gage solid THHN (white/black/green) manually (electric drill) spiral twist and snake through conduit.

To my ears on my revealing system I hear NO difference between (1-4)! I think simply using a dedicated circuit with 10 gage copper makes the biggest difference.

I hope all that read this find it helpful, it’s cost me about $500 (out of my own pocket) to complete the testing.

* There might be other positive factors to using cryogenically treated wiring besides sonics. It might lower the operating temperature of equipment.

I do not think there there any breakers that work better than others for audio applications however it's possible that a cryo'd breaker and wire might have some advantages as mentioned above.

It is commonly recommended to run at least two or three dedicated lines from the breaker box.

As for your last question I recommend you read the post below on Audiogon in it's entirety:
http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1058278893&openfrom&1&4#1

I'm sure others will have some good suggestions also.
Best regards,
Question...Some say Romex is directional, but never say which direction it should go. Does anyone have any input?
I'm sure Romex is directional. I cut my wire the desired length and then listened to it run in each direction. It sounded more open when run one direction as opposed to the other. You have to try it to believe it, just as you have to try it to determine which direction it sounds best.