Whats the deal with CD players?


I have a hard time telling the difference between CD players, even ones that are cheaply made vs. 'hi-end', or even CD's vs. DVD players. I couldn't even notice a big difference between tube and solid state outputs. When i get a player home i'll set up a double blind a/b test vs. my inexpensive dvd player and have yet to find a player that i could honestly say was a marked improvement. When i read reviews, both amateur and professional, people make it seem like it's night and day. And what do people mean by jitter? Amps and speakers to me can be night and day, but Cd players? I currently use a pair of dynaudio 1.8's and some H/K separates and I'll admit I skimp on cables and use those plastic ones that came with my vcr and dvd player, but despite that, shouldn't I be able to at least tell which player i'm listening to? I'd upgrade my cables, but I don't think cables are to blame. I know this post will piss a lot of people off, but honestly, what is it that you hear that can make you drop tons of cash on a cd player?
128x128perkadin
Tweekerman brings up a good point regarding quality. I have had in the past about 4k in a transport and dac. They both were returned some time in their life for sevice to make them well again. They sounded great, but they broke. I do not know if the two companies still service the units. One of them, the transport, no longer has the transport mechanism made. If the mechanism is not used currently in cd-rom or DVD applications, beware if you are going to keep the unit for many years. You can buy a cheap DVD player and treat it like kleenex:use it and throw it away when its finished. Vinyl seems like a better investment to me than digital. By the way, I sold my two units and bought a cheap dvd player...big drop in sound quality. I will be buying a VPI soon. Jallen
There are a bunch of good ideas here, i might try some better interconnects, but i remain skeptical on how improved conductance will help over such a short distance, especially considering the innards of my components will not be nearly as good as the cables. Granted the improved sheilding should help, but i havn't had any ground hum problems and have a fairly low noise floor.
As for my equipment, I use the H/K signature amp and preamp (i use the preamps direct inputs to bypass the dsp)my speakers are the dynaudio 1.8's. I am happy with my current setup, the only thing that has led me on this search was that my sony 300 dvd player cannot play cdr's, so i have been looking for a dedicated cd player that will also improve my regular cd's. I was just suprised how little improvment other players made considering what i have read about the importance of the source. I didn't want to mention the CD players i have tested b/c the salespeople were nice enough to let me demo them, but they were all highly rated and ranged from 300 to $1100.
I think my testing methods are sound, i have given each extended listening periods with pre-broken in equipment, with many music samples. I don't think a person should have to train their ears to hear minute differences. In my opinion, these differences should be apparent, so that an $1100 dollar CD player would be able to trounce a $300 dvd player. Again, this is my opinion based on my limited experience and crappy cables. I will try some new cables and update my post. Thanks for all the responces, the posts have been quite inciteful.

First jitter is the cd equivalent of wow and flutter on a tape deck ( Speed variance ) Second this is supposed to make a difference in sound quality of your player . I bought a Mark Levinson No.37 transport without ever hearing one and WAS SHOCKED at how good this thing sounds . I have had up to 10 different players in my system and like you could not hear a lot of difference between them until I got the Levinson!
The Levinson jitter rate is supposed to be 12 or 25 times better than a regular player because it reclocks the data right before output . Well anyway the sound is STUNNING and I do not even have an up to date DAC and in comparison to my Panasonic DVD player it makes a mockery of it . The clarity and smoothness just disappears . As far as cables go try a pair of Kimber KCAG between amp and preamp and for your player outputs ! I know the KCAGs are expensive but when you hear them the sound quality will last long after the price has been forgotten!
I'm jumping in late, but I wonder how many of the posters have heard one of the more recent DVD players (mine was a modded Pioneer DV-4l4, only recently replaced by a Sony XA777ES) playing CDs. My DV4l4, despite the raised eyebrows of some audiobuddies, more than held its own in a $25K system where it replaced a nearly $4K CD transport/DAC. Compared head-to-head with "better" CD players and transport/DACs, it was never outpointed until I got the Sony SACD player. You don't ALWAYS get what you pay for.
It may be that you are not letting the new player warm up long enough. I find that some CD players take extended warm up periods to achive their best sound. Mine will take 3-4 hours of being turned on before it sounds right.