Good match for Eminent Technology ET2 tonearm?

Just be sure the table is very solid and no lightweight. The VPIs (HW 19 III and IV) used to work well when ET2s were more prevalent. Good luck. I had two of these arms -- one was delightful and one was a nightmare because both the Wisa pump and Airtech surge tank went bad and I didn't realize it. Dave

If you can find an Immedia RPM I or II,it should work well.I used an Air-tangent on mine.Solid ,with no suspension.

As Dopogue says, the VPT HW-19 III and IV worked well with the ET2 tonearm. Cartridges with medium to higher compliance, such as the various Grado cartridges (e.g., Sonata or Reference) are a good match.
.