Does the Quality of the USB cable matter?


I have a Squeezebox Touch connected to my Laptop via a 50 ethernet cable.
Also connected to my laptop is an external 1TB hardrive that my music is stored on via a 5 meter USB cable.

With this set up, does the quality of the USB Cable matter ?
128x128ozzy
Well, I just took the DH Labs USB cable off the Cable Cooker and I must report that for my application, I hear no difference between the DH Labs cable and my previous cheapo USB cable.
Hi Ozzy
What cable cooker did you use on the DH Labs USB cable? I didn't think they existed. I broke in my Tripp Lite USB cable by just putting a CD on repeat on my old laptop and connecting the USB cable to my DAC. I let it play for a week non-stop.
Jedinite24,

I have the Audiodharma cable cooker. Finding the right adapters was difficult but in the end not too expensive.
You need a USB to Audio adapter (L,R and Video with rca's), cost $2.39 Amazon. One of these for each end.
I also needed a USB B to a USB A adapter and a USB female coupler. About $10-15 bucks.
In my experience, I've found no difference at all between the free USB cable that came with a drive and a $200, all-silver "fancy" one from an expensive cable company. But, that's running from a Mini to an asynchronous USB DAC. Asynchronous is meant to be "more immune" (whatever that means) to cable quality due to the way, or more like where (ie, in the DAC, after the cable has done its job) it handles jitter issues. I have also read that cable quality can matter more if running USB 2.0, rather than 1.1. But, here, the "quality" can be inverted. USB 2.0 runs at 40x the bandwidth of 1.1. Hand made, bespoke, expensive USB cables -- sometimes -- are simply not technically up to the task of operating at the required tolerances, while computer/robot manufactured, cheap, high production run cables are designed to do precisely that. There was a time that at least some DAC manufacturers were affirmatively warning customers away from "high end" USB cables for 2.0 for just this reason. Think Ayre still does. Expect that this technology gap is shrinking in the shops hoping to charge a lot for "audio grade" USB cables, but it's tough to imagine how that gets done other than, at least at some level, repurposing computer-designed and manufactured wires. But that's a guess. All that said, I'd expect the cable to matter even less between the drive and the CPU. There, I'd guess it's purely binary (pun intended): either adequate bandwidth or not. You can send your bits in as fancy a wrapper as you want, but I suspect the CPU sees the same bits either way. (Put differently, I'd guess that the time and processing spent by whatever software chews up and spits out the bits in the CPU effectively renders the means by which the bits arrived there in the first place -- be it the wire from an internal drive or the wire from an external drive -- largely irrelevant, particularly if you are buffering and playing out of RAM in the first place.) Anyway, my experience for what it's worth.
I just got done auditioning USB cables. I always noticed a difference between cables. A couple were worse than stock. System synergy. But the rsad cabling made a huge positive impact. You're system has to be resolving enough, and the cabling has to compliment the set up.