3-way under 1000 new.

www.gr-research.com or maybe VMPS.

Audiokinesis, What I'm trying to say is that I will be running 2 different amplifiers to my biwire speakers. I most likely will run a ss amp to the woofers, and tube to the top. I have also been told that even using the same amp I can run 2 seperate kinds of cables, and I'm quite curious about this.

I think what people are trying to say is, that bi-wiring is not going to make up for the deficiencies of the speaker. It is a tall order to make a good 3-way speaker for $1K for the pair. If you take the simple method of looking at the dollars, a typical 40% dealer profit puts cost at $600. The manufacurer probably also makes about 1/2 that, or $300. That leaves about $150 for assembly labor like building the cabinets, and maybe $150 to buy 6 drivers, 2 3-way crossovers, connectors, MDF and veneer, wire, grilles, and shipping boxes. If you're lucky, you may get a $20 woofer, a $15 midrange, and a $10 tweeter. Is this what you want to bi-wire to your nice amps? Since I am aware of this, I bought $900 fullrange drivers(Lowther) and made my own cabinets, of a proven design, for a couple hundred. Guess which one will sound better? My point, just like the other posters above have tried to make, is that less can be more, particularly in the lower price ranges. With a 2-way system at the same price point, more of the money can be spent on better drivers, and can get you better sound for your buck. But you must audition, because sometimes you get poor quality drivers in 2-way also. This is the reality of retail audio, and it applies to amps, and everything else, as well as speakers. Now you know why people are spending mega-bucks on their systems.

Twl,

I hear what your saying, but unfortunately I just don't have the equipmwnt to make my own cabinets. But if it is true that most of the money is going to manufactures and dealers. Then why can't I go buy a cheap pair of speakers and then upgrade the drivers myself?

Tube 777, You are certainly entitled to go your own route. I can' help but think that you may be putting the horse before the buggy. Used speakers will offer much greater value, especially at your price point. Three way speakers are by there very nature going to have some size to them (I think the Vandersteens size is typical). Personally I'm more concerned with foot print than actual size. While bi/tri amping/wiring can have advanteges, at your price point I would want to keep things simple. Better speakers are made with a combination of considerations with compensations made with cabinet,crossovers,etc. Just willy nilly replacing drivers could possibly (probably?) make things worse, even if said drivers are better. This not to say that mods can't improve your system, but only to say that it takes expertise (including appropriate testing equipment) and money and still comes with risk. I would be much more concerned with speaker to room interaction and how it effected my musical enjoyment than in playing with wire and/or amp combinations. Another area that on the surface may seem like a good idea but in practice take a great deal of expertise to make work. Again this type of fine tuning can provide signifiicant improvement, but your budget seems to be out of range for these priorities. IMHO it would be like contemplating racing slicks on a Yugo. I don't mean to rain on your parade and I wish you the best, but my advise would be to keep it simple.