Von Schweikert 4 Jrs, Rear Tweeter settings?

I have the VR4GENIIISE. The rear tweeter adds depth and focus to the sound stage. You would adjust according to your room set up. Experiment with it. Example, if the speakers are out quite a bit from the front and side walls you may like a little more volume. I have mine bi-wired with cables that bring out the best from each module. Have cables that make the mid's and highs sound great but aren't the best for low end resolution and vice versa.

Ken,

Thank God there is someone else in the world that is asking this same question. I posted this a year ago and got a lot of answers. I had the hardest time figuring it out and no one else seemed to have a problem. My dealer who I trust recommends anywhere from 1/2 to 2. Anything more and the smear is too much anything less and it sounds too dry. I like 2 if you can get away with it.

Rob

Drken,

I'm a dealer for Von Schweikert and have played around with the VRjr's quite a bit. The speakers sound best in our shop shotgun bi-wired. It does make a very nice improvement in transparency and coherence. The only deal is that you need to use the SAME cable for both the lower and the upper frequencies or you can hear discontinuities.

I prefer the reat tweeter set to its' "minimum on" operating position. Try sticking your ear to the rear tweeter and listen when it just comes on. That is the most perfect blend we have found in our room. As always, YMMV.