Krell KSA-200s First Time Use

Hi, You need a dedicated 10 awg electrical cable going from your inside breaker box to the receptical you are going to use, you need a 15 amp breaker, your amp is shutting off because you do not have the current to make it operate!, The receptical you have now is also sharring the power with other recepticals, most homes have daisy chained one receptical to the next!, also, you need to make sure you are useing a 20 amp receptical, your amp will starve for power other wise, never connect your krell to a power conditioner, the same will happen!, Hopefully, your amp is going thru a safty mode to protect its self because of under current and voltage, keep me posted, I will do what I can to help.

The Krell 200S is designed to be used with a 20amp circuit, but what you are describing is IMHO not attributed to using a 15amp supply. The 200S at idle, only consumes 150 watts, therefore, the 15amp current supply should not be starving the 200s. Something else is causing the amp to shut down. If you can try the amp with a 20amp circuit, that would confirm my suspicion.

Ask KRELL.