Pre-Amp for Class D Amp

Any decent tube preamp or buffer stave would go nicely with Class D amps. As mentioned, tubes are the key to a well balanced system using Class D amplification. We have been designing around Class D for several years.
The Bel Canto's have a high input Impedance, 100K/200K ohms so there are no concerns there. They do have a rather high sensitivity at 3V but again, most preamps will drive them to full power with no problem

Class D amps are not nearly as sterile and cold sounding as they were back in 2005. Those days are gone with the recent major advancements in Class D technology. So its absurd that Class D works best nowadays with tube Preamps. Redundant.
You don't need a tube Preamp with the best of Class D. Here are the best solid state Preamps at $4K and under that will get you the full organic character your seeking. 1. The Hegel P-20 at $ 2900.00. 2. The new just released Cambridge Audio Azur
851E Preamp at $ 1850.00. 3. The Wyred 4 Sound level 2 STP-SE Preamp upgrade by EJ at $3749.00. And currently the best solid state budget Preamp on the market at $1000.00 is the just released Emotiva XSP-1 Gen 2.
Stunning board work and construction for the price.

Response34,
A modest correction, 3 volts amplifier input sensitivity would be considered "low" not high sensitivity. The lower the volts= "higher" sensitivity. An amplifier with .5volts is more sensitive than an amp with 2 volt input sensitivity for example.
Charles,

I bought and built with some Abletec modules. I use them with great success with a Coda CL Preamp.
Tim

Your are correct Charles1. It was not written correctly. Thanks for clearing that up.