VAC Signature Mk IIa Preamplifier with phono?

My Grado is unusual as it is a low output MM design thus requires 47K load with high DB gain. The VAC only has high gain low ohm combination typical of MC. Kevin’s pre has the reverse which is more typical. He pointed this out to me when I sent him the question.

Sorry for my misunderstanding, Skinzy. It was due to your previous post stating that the MM load goes to 480 ohms, while you would actually use the 'MC' gain setting with your low output MI Grado cartridge.

Skinzy, If you don't think VAC phono works in your situation, why ask for opinions in making a purchase?

Hifimaniac, I am desperate to add the phono as it's not really a cost issue but the MM Load only goes to 480 ohms which will kill the treble. Any way to solve this?

Skinzy, since you have a low output MM, you would select the MC input selector on the phono Kevin installs and play with the ohms setting once you have it connected. Call Kevin Hayes at VAC and discuss my suggestion, but I think you will be fine. You will use the MC option so you will have a boost in output. If you ever buy a higher output cartridge, then the MM input. Good luck and happy listening.