Attenuator recommendations

Clio09, what did you think of the Rothwells? There are some reports on AA that suggest they "color" the sound a bit.

Tonyptony - At first I did not think the Rothwell's colored the sound, but after hearing both the EVS and Endler attenuators to my ears and in my system I felt the Rothwell's were slightly warm. However, I have to say for the price, compared to the EVS and Endler attenuators, this slight coloration can easily be overlooked.

I think I figured out what is going on though I am not sure.

First, my cdp output is 6vrms which is much higher than the 2-3vrms that I usually see for other cdp.

Second, the max output of the pre I am auditioning is 50vrms while my current pre max output is 20vrms. They both have the same number of volume steps (0-100 at 0.5db each step). I think this tells me that for any given volume setting the preamp I am auditioning will be outputting a higher voltage than my current preamp. This would lead to higher volume. Both of the pres have about the same gain 17-20db.

Am I missing something?

Since my amps which seem to be have too low an input sensitivity (is too sensitive), are not going anywhere, it looks like I either find a pre that has lower output voltage and gain, or use an attenuator.

Tboooe, you need to re-read Herman's last post. Gain structure is the most fundamental element in system building (synergy). If the components you select are not compatible, then there is nothing you can do that will correctly "fix" the problem. In the context of a high end system an in-line attenuator between your main source and your premap just doesn't cut it.

Guy at Placette can make you some plug in attenuators with a single Vishay so no loss of clarity/imaging will occur. You just need to determine how much you want the cut. 10dB?