New Rowland Criterion 2-chassis battery pre


Jeff Rowland Design has just created a page for its upcoming statement-level, twin chassis, battery powered full function preamplifier. Detail is still scant, but a little bit of info is already available, in addition to front and rear view pics. Here’s the page:
http://jeffrowland.com/Criterion.htm
And here’s the front view:
http://jeffrowland.com/Criterion-front.htm
And here’s the rear view:
http://jeffrowland.com/Criterion-back.htm

You will find a few specs already on the site. JRDG should be publishing more info in the next few weeks. I will post here as I receive it. in addition to the published specs that you can read on the page above, here are a very few additional tidbits that I have learned this far:

. Uses Burr Brown TI OPA1632 high speed fully differentially balanced modules.
. Includes phono stage.
. Uses standard NiMH D-cell batteries available in most electronics stores, loaded in 2 rear-inserted tubes of power supply chassis.
. Capable of AC/DC operation . . . will recharge batteries on independent circuit during AC operation.
. Full remote control
. Target price $18K (not sure yet)
. Availability: probably early Fall 2008.
. Will be featured at RMAF in Soundings Hifi suite Marriott 503 or 505 from Oct 10th to 12th in Denver.

And sorry folks, I have not heard this device yet. Nor I have any good third party reports on its sound. Any speculations on Sonics from my part would be just. . . pure speculations. I’ll keep everyone posted as I learn more.

Guido
guidocorona
Cappuccino, what design/sonic differences are there in the recent 301 amps vs the original series? I have heard that there some differences, but I do not know what these may be. Guido
"very sensitive to other equipment and cabling"

Capuccino,

very interesting posting ! ... I think you are right

Power cables can make a huge difference and of course also interconnects. That's also why J.Rowland developped his PFC1

Read what Gary Koh from Genesis says about class D ...

interview:

"

N.D. -I would like a few words about your class D amplification, which is a relatively modern implementation in the high-end audio business – it has been mostly seen in consumer applications. Do you believe that it might even account for the future in amplification?



G.K. -The first working model of a class D amplifier was designed by John Ulrich, it was called «The SWAMP» (SWitch WAve AMPlifier) and was delivered in 1976 by Infinity. One of the founders of Infinity, Arnie Nudell was also the one who founded Genesis. In 1991 Infinity was already using class D amplifiers; we’ve been using class D amplifiers for the past nineteen years!



N.D. -So it is a myth that class D is not adequately developed to serve its purpose…



G.K. -It was not developed adequately. Until a couple of years back, class D amplifiers… I could not sit and listen to, they did not deliver music. Class D was very, very good for bass, which is why Genesis speakers used class D amplifiers since 1991 for the servo-bass part of the system.



My class D amplifier came with a story. I was trying to find a more reliable, a better amplifier for the bass and I reviewed all the available class D amplifiers; all those that were available as modules or as designs. After about two and a half years, I finally settled with the Hypex amplifier module, for the bass. Around that time, I don’t know if you are familiar, but I developed a tube amplifier for Genesis...



N.D. -Yes, I saw that they are sold out!



G.K. -The tube amplifiers are sold out… The tube amplifiers were done for only one reason: They were proof of concept that a cheap amplifier can be used to drive Genesis loudspeakers. You see, the designer of Genesis Loudspeakers, Arnie Nudell, was very famous for making speakers that are very difficult to drive; they had very low impedance, they demanded a lot of current and a lot of dealers said that -at that time the equivalents the 5.3s were like, I think, $14.000- to drive a $14.000 loudspeaker they required a $30.000 amplifier! I told them “no, this just means that the amplifier is not designed properly!”. So, a very famous dealer -I won’t mention his name- looked at me and said “if you think you can, you design an amplifier that’s cheap and can drive these spakers!”. It took me… two years; two years later I brought a pair of the M60 monoblocks to his store, I put them down and said “OK, which preamp do you want to use?”. He picked a preamp, he connected it in, then we connected it to… that was the 5.01 and it drove it perfectly. So he lost his bet; I won my bet… Here was a $4.000 amplifier that drove, at the time, a $14.000 loudspeaker!.. The problem with tubes, though, is that the moment you buy the amplifier, it begins to deteriorate, so I didn’t want to really continue making those. However they were a proof of concept; if I can design it -and I am not a famous amplifier designer- then everybody else can design it! That’s the amplifier, I’ve proven my point that you don’t need an expensive amplifier to drive the Genesis speakers.



N.D. -It was like an etude, a study on the subject.



G.K. -It was a proof of concept, it was a study.



N.D. -Your current class D modules, do you design them or are you still using Hypex?



G.K. -I still use Hypex, but I heavily modify the Hypex modules. The reason is that if you listen to a lot of class D amplifiers, they don’t have what I call the “soul” and the emotion of music. You know, you don’t feel that the singer sings of a lost love or you don’t feel that the singer is actually in love with you and she’s singing to you. The problem I solved -after actually discovering that it wasn’t a problem of the module- was the problem of the power supply. I designed a power supply that works perfectly with the class D module, to deliver that soul and emotion.



N.D. -Is it a linear power supply or a switching one?



G.K. -It is a linear power supply… I couldn’t make a switching power supply work; I tried.



N.D. -I know it is quite a bit of a challenge, but, if anyone can do it, I believe it’s you.



G.K. -Thank you!"
Guidocorona,
I believe it is the same difference as for the stereo amps, I mean the old 302 against the current 312. I have not heard the old 301 monos or the 302 stereo amp so I can not comment on the difference myself, but those who have say the new model is quite a bit better.
Cappuccino, in that case the more recent 301 batches must be quite special. . . as much as I found the original 302 lacking, I am still in love with the 312. But I'm looking forward to hearing the newest 925 in my own system. . . probably Q2 or Q3. We'll see what the newest design does for living. G.
Cappuccino, Not sure if I or someone else has asked you this, but have you any knowledge of the comparitive performance between your 301 mono's and the 312 that Guido & I both have being run by the Criterion. Also, have you tried or already own the Criterion? Aloha, David.