2. amps-preamps
  3. 1230691401

Bi-amping Snell Speakers Anyone?

I have recently bi-amped my system and the mids and hi's seemed to overpower the low end. The amps are identical so I just turned the volume down on the mid /hi amp. Is this normal in some systems or in a more perfect setup should I be making other tweaks to get the volume set on max for both?
128x128blueskiespbd
Post removed 
blueskiespbd's avatar
blueskiespbd OP
161 posts
 
the system is as follows: Snell CV speakers, pair NAD 2700 amps, Linn Kolektor pre, Rotel cd, Straightwire IC and speaker wire, APC conditioner, dedicated circuit, room is sound treated and trapped
bdgregory
1,580 posts
 
it sounds to me that while your amps are the same, they may not be matched for some reason. Did you connect in vertical or horizontal config? If Horizontal (ie one amp driving mid/tweet, the other driving bass), try vertical. If one side is louder then your amps output aren't matched.
blueskiespbd's avatar
blueskiespbd OP
161 posts
 
Yes I had them vertical for months and did not notice any unbalance in the volume.
markphd
667 posts
 
Doesn't sound right to me. If anything, I might have expected the bottom to be more prevalent. Switch the amps around to see if the same thing happens with the other amp on the top.
More to discover