2. amps-preamps
  3. 1254100810

communication cable between Levinson amp/pre-amp?

I just bought a Mark Levinson 331 amp and 380 pre-amp and they have ports to hook up a cable between them. I assumed this was a standard CAT6 cable, but the port on the pre-amp marked "master" is not a CAT6 input. Is this a Levinson only cable I need to get from them?
dave43
kenyonbm
140 posts
 
You need a RJ-45 modular cable.
almarg's avatar
Ag insider logo xs@2x
almarg
8,673 posts
 
After checking a little further, I believe this is exactly what you want (note that various lengths are available):

http://www.cablestogo.com/product.asp?cat_id=707&sku=09600

A 6-pin 6-conductor cable is RJ12, btw, not RJ45.

Regards,
-- Al
starcon
98 posts
 
you can buy the needed parts at radio shack and make your own any length quite cheaply. I made one to go from a levinson preamp to my amp. cost is dirt cheap. The crimper costs about $12 dollars if I remember correctly.
More to discover