Heeeelp New used BAT Vxi3 - Hisssssssss


ok, this cant be normal. I hooked up my new to me but used BAT. XLR from preamp to amp, but using singled ended from CD to Preamp.

I start it up and im getting a rather loud hiss. Volumn independent. It says constant and is the same on all inputs regardless if anything is hooked up or not.

Is this normal. It cant be!
last_lemming
Oops Vk-3ix - my mistake there

So I switched out the stock tubes and dropped in the Mullards that came separately with the unit and the hiss stopped.

But now some wierd things are happening the new tubes (I say new they have 50 hours on the according to the previous owner):

1. I hear this ding - ding - ding when the preamp is just started lasts about 3 min. Its supper faint but its coming through the speakers. It almost sounds like very soft bells.

2. The bells go away then i start hearing a crackling noise from both speakers that's faint and doesnt go up with volume. Once a few minutes go by it only come out the left speake and the right speaker seems normal. I switched the tubes and the crackling switched sides.

3. There is a louder hiss from the left speaker than the right, though not nearly as loud as the stock hiss and it can't be heard from sitting position.

Could tubes go bad thru the shipping process?
Yeah, tubes warming up can be strange sounding. usually the recommendation is to mute the output for a few minutes at turn on.
It is normal.
And glad your initial problem was just bad tubes.