Top or best amps for merlin vsm

As it probably will be no surprise to most Merlin fans, I was hoping to find an SS amp with OTL qualities, but that may not exist.
I have a small room so then I may get away with an Atma-sphere M30, but I thinketh that I would like to have the power of M60, but the heat is too much and don't want to deal with so many tubes. I would consider the Berning but the price tag is stopping me.
I liked the sound of M60 though.
I didn't title this thread as such;"best ss amp for Merlin" because I was wondering if there are other tube amps that may not run hot or be too expensive.
Plus I was wondering in what order do these amps fall in.

Ollirdep, do you own Merlin VSM now, if so, which version? My understanding is that the newest VSM sounds very good with either tube or SS amplification. I used to have the VSM MM version, and they definitely benefited by using tubes. I still own the TSM MM in a second system and run a Cary sli80 with excellent results. Good luck.

Regarding the M-60s it is possible to run them with less output tubes per channel. For example you can remove two output tubes per side. Less power and less heat are the results, but in this configuration you should still have more power than an S-30.

You have a lot of nice choices on your list.

In a small room, you don't need a ton of power to get VSMs to really sing. Unless you like to listen LOUD!, in which case the VSMs might not be the best choice, anyway.

Assuming that you're not headbanging, I'd note my experience, FWIW.

I've used a lot of different amps with my VSMs (including several solid state amps that were excellent matches) and the bottom line is that the speaker reveals the specific qualities of the mated amplification more clearly than any other I've owned. I really doubt that you'll find a SS amp that really "feels" like an OTL thru the VSMS, so...

If you really like the particulars of OTL sound, I'd suggest that you go with a low power OTL amp. Thus will minimize heat and the lowish power output will very likely still be more than adequate into the VSMs benign load. I had an early Atma-sphere S-30 that was extremely sensitive to the partnered load and it was very happy with the VSM. I also had success using the 15WPC Cary 300B in a moderately sized room.

My own view, go OTL.

Good Luck

Marty

Clio09 makes a good point. I believe the power supply regulation in the M-60's is higher quality than the M-30. So if you have the space for the amps, you could cut back on tubes and heat and get the benefits of the monoblocks.