Musical Fidelity A1 experiences


I have the original MF A1 and I never had the chance to get the right speakers for it. My past speakers that i used are Epos ELS3, Magnepan 1.6, MB Quart Domain 30's, Dynaudio Audience 52, Merrill Zigmahornet "fullrange" and never got the sound right. All of the speaker mentioned the sound it created, the bass is quite thin and the highs sometimes fatiguing. Does anyone have experiences on the best speakers to use? or is it the amps fault?
xtian_lugz
I use to sell them; I also thought that they had a "warm" sound which was quite good. I used them with Spendor and Musical Fidelity speakers. They should not sound thin or lack bass. Either it is not working properly or the ICs or speaker wires are a bad match. It should run quite hot; if it is not then have the bias checked.
It does heat up so no bias problems. For the speaker cable i'm currently using monster cable. I'm planning to keep this amp so I need to find a set of speakers that will match.. Did anyone have tried B&W's or any brit/italian brands?
I remember visiting a local NYC dealer years ago while helping a friend shop for speakers. I still remember being amazed at the sound that the A1 produced driving a pair of original Proactive Tablettes. It was beautiful, with electrostatic- like clarity and VERY sweet highs. Now, the Proacs could not produce much bass, but it was not the fault of the amp, and fatiguing in the highs it is not. PSB calling?
If I'm thinking of the right amp, it's the little 20wpc class A. I owned one for quite a while a number of years ago. Nice sweet sounding piece.

All the speakers you mention are not on the 'easy to drive' list. My guess is you are straining the little guy if the sound is thin and harsh.

You might look at some of the higher efficiency speakers, particularly those with higher impedance. I don't think class A SS likes 4 ohm loads.

And if you room is big, or you like to listen loud, that is definitely not the amp for you.
I had one of their older integrated amps (A300 I think) and with Maggie 1.6 it sounded as if cymbals were four feet in diameter and way out in front, when I switched to a Plinius 8200 things went back to the proper perspective. The A300 was bright, nice tone but very tipped up.

It sounds as if the A1 may be an older model yet so maybe this info is worthless...