Have cables become somewhat of a snake-oil topic.


I've invested many tens of thousands in high end 2-channel home audio gear and cables. I'm also a musician who has recorded and created mixes in many of the top recording studios in LA, NY and Nashville. These studios most often use the highest quality power treatment, tube condenser microphones, pre-amps, EQ modules, AD/DA converters, compressors, monitors, etc. Obviously, the goal in a recording studio is to capture the realism of the live studio performance for both vocals and instruments, and create a final mix-down that highlights the natural subtle nuances of the performances of each musician.

With that said, my 20 years of informal research inside these studios says that virtually NONE invest in high priced specially stranded balanced interconnects or speaker cables. Instead, various models of a particular Japanese cable is considered the studio "gold standard" and is WIDELY used in the top studios across the country. Now any good mixing engineer is at least AS interested as any audiophile, in all the audio characteristics and variables we discuss ad nauseum in these A-gon threads. So if recording pros are willing to spend hundreds of thousands on electronics and speakers, to capture the natural and neutral sound of a musician's studio performance, why is it that expensive cabling is seen as the snake oil equivalent in the recording industry. (Moreover, I could go one step further and ask why some home audio D/A converters far exceed the cost of the most sought after professional studio D/A converters?.......we'll leave that for another discussion.)

I DO NOT disagree that substituting a Nordost, Siltech, Cardas or various other high end brands into my personal studio rig do not make a difference. There are indeed audible differences between the brands in terms of bass extension, smoothness, imaging, graininess, etc. However, these DIFFERENCES are not necessarily equivalent to an IMPROVEMENT in capturing the natural/neutral details of a given performance.

(I intentionally will not address the mastering process since that has everything to do with radio and marketing execs commercial sales expectations, rather than a true to life presentation of the musical performances.)
jymc
I don't think their goals are like ours to be honest. We are even more discerning:-)
Average rock, pop, country etc recording has about 10db of dynamic range, average euro classical recording has about 25 db dynamic range.
What punch the midrange thru the car radio studios in Nashville think is irrelevant to me.
Good question and great post, but my observation is that most audiophiles try to know as little as possible about the recording process just because it raises questions such as this.
03-20-13: Hifiharv
Hey, what is that Japanese cable they consider the gold standard?
Mogami.
03-20-13: Onhwy61
Good question and great post ....
I'll second that.

One point I would add is that both technical considerations and a considerable amount of anecdotal evidence that I've seen here and elsewhere support the idea that sensitivity to interconnect cable differences will generally tend to be less in the case of balanced interfaces than in the case of unbalanced interfaces. That is particularly true if the output impedance of the component driving the cable is low. Studios generally use balanced cabling, and I suspect that more often than not those cables are driven by components having low output impedances.

I would also add that in the past I have seen more than a few posts here and elsewhere in which people have expressed surprise about how good the results were after they changed their high priced cabling to vastly less expensive Mogami. Not in every reported case in which that has been tried, but in many and probably most of them.

Regards,
-- Al