Has anyone tried making their own interconnects?


Hey guys,

I've posted a few threads lately asking about DACs and Class D amplifiers and such. My current system consists of a recently acquired Marsh P2000 pre amp, Aragon 2004 amp, Emotiva XDA-1 DAC, Squeezebox Touch and Silverline Minuet Supreme Plus speakers. I'm also running all Blue Jeans cabling.

I was listening to some Diana Krall last night and it really hit me that I'm pretty comfortable with the synergy that I have with my components. I really enjoy listening to my system.

So, I was wondering if maybe I could try just a little bit of tweaking, since I'm no longer feeling an urgent need to change any components.

My interest is in making my own interconnects. I really have no desire to spend even $100 on an interconnect, but I've found that it is possible to get some good silver or silver plated copper wire at very reasonable prices.

I have a good soldering station and am fairly proficient with a soldering iron, so I figured that I could try my hand at making my own.

Have any of you tried this? What were your results? Which connectors did you use?

Thanks.
tonyangel
Thanks guys. If nothing else, you have certainly fueled the fire.

I think I'm gonna start with something along the lines of a silver plated solid core copper wire using PTFE sheathing and see what I get.
I've made lots of interconnects over the years. It can be fun and sound great, too. Below is a prior description I had put together for a friend of some of the sources and recipies that I've used before. In terms of parts, while you can get them from either of these (or many others), Parts Express is also a great, and often cheaper, source if you know what you're looking for. You can also get wire from any of many sources (Mogami is nice, Blue Jeans and Signal also sell wire, and many of the "Big Names" will also sell you parts to cheff up on your own. More flavors and options than you could possibly want.)

This is a great, one-stop resource for DIY wires. http://www.homegrownaudio.com/. They hit the scene about 10 years ago and were offering bargain basement pricing for really great wires, along with kits to make them at even lower cost. Since then, they’ve gotten a lot more expensive. They have DIY kits for their production wires, as well as various iterations of parts that you can buy to mix and match your own. All their designs center around braided silver or copper wires. I have two sets that I bought assembled and probably 4-5 sets that I got as raw parts and made myself. You can see their kits, which is likely not what you want, or just parts such as bulk wire in various flavors (silver http://www.homegrownaudio.com/bulk-silver-audio-wire/) (copper http://www.homegrownaudio.com/solid-core-ofhc-copper-wire/), each in various iterations (bare, Teflon coated, cotton coated, etc.). RCA terminators (http://www.homegrownaudio.com/rca-interconnect-connectors/). And various other useful bits, such as heat-activated shrink wrap and nylon tubes to encase wires if you want to go that way. (http://www.homegrownaudio.com/categories/DIY-Extras/).

If you really want to go deeper into the world of DIY wires, like this guy as a resource (http://www.venhaus1.com/diysilverinterconnects.html). I made a couple sets of these a long time ago, and it was fun. Looks like the “recipe” has been updated, and that he has started selling both finished cables and DIY supplies. http://www.vhaudio.com/products.html. Looks like he’s really focused on the high end of the spectrum. This is really nice stuff, probably very deliberately the best available in terms of raw materials, but a resource. When I made the set, he didn’t have a website, just found the recipe floating about from general buzz, and sourced the parts all over from manufacturers. Here, he at least offers the potential for one-stop shopping. As you’ll notice, the RCA terminators are usually the most expensive bit when it comes to parts. The ones on this site are top-shelf, and can be several hundred $$ for the requisite set of 8.
Mezmo, that venhaus link is actually what got me thinking about this. I just wanted to ask some of you here what you thought about it, just in case.
Cool. I think yes, it's the real deal. Not currently using the ones I made, but then I didn't do a very good job. Alas.

Honestly, with good materials and craftsmanship, don't think there's anything particularly magic to wires. Markups are huge, and DIY has always struck me as a great idea, on wires in particular. Of course, picking the right materials and supplying the craftsmanship is the trick -- one that I wouldn't claim to have dialed in on either front....
Well, what makes sense to me (not that it means anything) is using a good quality wire with a PTFE sheath of sorts allowing lots of air around the wire. It also sounds pretty easy to do, especially for the lengths normally associated with interconnects.

I'm thinking about trying something like this....http://www.ebay.com/itm/AUDIOPHILE-SOLID-CORE-SILVER-OCC-BULK-WIRE-60FT-24AWG-SPECIAL-1-WEEK-PROMO-SALE-/111123441450?pt=US_Audio_Cables_Adapters&hash=item19df79272a