2. tech-talk
  3. 1210876909

Using big spades on a barrier block.

I just bought a pair of Cardas Golden Cross speaker cables for my Kilpschorns and want to know if there is an adapter that I can buy to connect the cables to the barrier block on the speaker end?

The Cardas spade is pretty big and i'm hoping there's a way to connect the cables without cutting off the spades and just using the bare wire to connect to the barrier block.

The barrier block has a #6 screw from what I can gather.

Any advice would be great.

Thanks!
andre74
swampwalker's avatar
Ag insider logo xs@2x
swampwalker
5,132 posts
 
When I had VAndys I found that the plastic "ears" that projected upward were slightly flexible and with gentle pressure on the spade, I could compress it slightly and then there was enough "give" on the plastic to get spades in. Unfortunately, if you have the larger Cardas spades, I doubt you will be able to do that.
timrhu
2,778 posts
 
Before removing the spades you should be aware that each strand of wire has an enamel coating that will prevent contact with the terminal block. Simply stripping back the wire jacket won't work. The coating has to be removed, not an easy task.
andre74 OP
7 posts
 
Thanks for your input guys.

Looks like I'll be having some fun, or not with this over the weekend and hopefully I can figure it out.

Best,

Andre74.
More to discover