adding a fan to an enclosed cabinet


Hello. I recently bought a cabinet to house my stereo equipment and sit my TV on top of it. I never had any real issues before with my amp getting too hot when I had it sitting on a rack that was not enclosed. Both my amp (Bryston) and HD cable box (Scientific Atlantic 8300?) get way too hot. What is the best solution for this other than leaving the cabinet doors open? My one thought was to add an exhaust fan (the type that would go on a computer case) to the back of the cabinet. Would I want to add an intake fan to circulate the air even more? The only ventilation that it has now is 3 1.5" wide openings running the height of the cabinet. Thanks!
vanderstephen
A friend of mine does the exact same thing you are thinking, I believe he uses a variable power supply from Radio Shak so he can control speed.....and thus noise. Computer fans can be had very cheap.
sononorway, sounds like my situation is similar to yours. It's a piece made by a regular furniture company. The back is thin plywood (or fiberboard)-maybe 3/8" thick. I'll check radio shack and see what they have to offer and pick up a couple. thank you both for the replies.
I just added a fan to my rack to keep the shelf above my amps cooler. I researched computer case fans pretty heavily and found this fan . It is so quiet I can't hear it running from one foot away. It runs off of a 12 volt DC power supply which I had laying around the house from old calculators and cell phones. To vary the speed of a DC motor you vary the voltage, I used a 9 volt power supply and it gave me the reduced speed and quietness I needed. It may fit the bill for you.
This is like Deja-vu. I have a cabinet similar to Sonofnorway, purchased the variable dc power supply from Radio Shack like Chadnliz's friend, and use the exact fan pictured in the link by Mijknarf. The only thing I can add is whether you blow in our pull out, you are going to have about 5 times the dust you normally do so clean things with a soft brush attachment on a small vac regularly.
If you're interested, the fan I used is a Papst/EBM 8830N. I got it online from Newark InOne. Certainly not the cheapest, but it was the quietest I could find.