dangcaonguyen
Responses from dangcaonguyen
How low of the cartridge output the Allnic H3000 can handle? Never mind, After reading the link @whart provided, it is worth to try.I will order it in the next few months and then report back the results. Thanks Calvin | |
How low of the cartridge output the Allnic H3000 can handle? Oops,gec u52 is 429.99/tube. | |
How low of the cartridge output the Allnic H3000 can handle? Thanks, I will look at those tubes.Calvin | |
How low of the cartridge output the Allnic H3000 can handle? Thank you all of you who has replied, I really appreciate your amswer.Now I know that it could be my life time phono stage.@whart I have changed the rectifier tube to Hytron. It sounds good to me but do yoy have any others to recommend?Thanks,Calvin | |
Can I use the Walker Audio precision motor controller with the Avid Volvere turntable? @lewmYou are right, the Walker does not work with the Avid Volvere.Thank you everybody. | |
Can I use the Walker Audio precision motor controller with the Avid Volvere turntable? Hi Lewn,The provided link is for the new model Volvere SP, mine is the older model. I am contacting the seller to verify it. Thanks | |
Can I use the Walker Audio precision motor controller with the Avid Volvere turntable? @lewm Motor : Modified 24v 55mNm ac synchronouswill they work together? | |
Can I use the Walker Audio precision motor controller with the Avid Volvere turntable? @lewm I wilk find out.@chayro I just sent the message few minutes ago. Thanks all of you | |
Phono Protractor. Recommendations? I have all 3, Mint, Dr. Feickert, and SMartractor. They are all good. I like Smartractor the best. If you plan to change cartridge more often, I recommend the Smartractor. | |
How to record from lps to tapes There is the switch for Bal-Unbal on the board. I switched it back to Balance and my system is working as normal. Thanks for all the helps gents.Calvin | |
How to record from lps to tapes This morning I hooked up the Teac to the system. It turned out the problem was on my Otari. I might touched a switch when I cleaned yhe machine internally. I will check with the maintenance manual and report back. Thanks everyone. | |
How to record from lps to tapes I mean the same volume setting at “41” and the sound comes out normal. | |
How to record from lps to tapes Hi @cleeds The Allnic is the phono preamp, and it is set at the proper gain. I am listening to my lps right now at the same volume when I recorded. | |
Power conditioner and high end power cord I just upgraded my power cords from Tara Labs reference AC and Harmonic Technology Pro AC 11 to the Virtual Dynamics Revelation and Nite 2. Big improvement. | |
Which power cords should I look at? @mrdecibel I completely agree . After replaced the factory power cord to Virtual Dynamics Revelation in my CJ Premier 140, my system was transformed to a different level. |