128x128

dnath

Responses from dnath

Elrog 300B vs Takatsuki 300B tubes
A friend of mine that runs a SET amp with 300B output recently had one of his Elrog 300B fail. Prior to that he had been using modern WE 300B for as long as I've known him which is a good 7 years. 
Analog Impressions from Munich High End 2015
Atmasphere is the 12" Tri-Planar using the same bearings as the 9" VII? Any other differences besides the length/effective mass? 
HELP HELP - VENDETTA RESEARCH SCP2A FAULTY
The Vendetta does need extremely closely matched JFETs which are no longer made. IMHO I would only let John Curl work on the unit. 
Mobile Fidelity Surface Noise
Also there is lots of tape hiss on Van Gelder's 60s recordings. His equipment did not have the best SNR. On Joe Henderson's Page One and Grant Green's Idle Moments the tape hiss is present on every version I've heard including the original first p... 
Mobile Fidelity Surface Noise
Davef if this is the MM 33 rpm reissue for Idle Moments or Blue Train, they are repressing it because the first pressing run of 1000 sold out. 
Basis Audio Super Arm 9
Anyone upgrading to SA9 from a Graham Phantom II Supreme? 
Retipping Miyajima mono cartridge
"Dnath, not to sound snitty but have you considered at the time those "vintage mono LPs" were produced that only conical styli were common?"Understandable, which is why I try to only buy very close to NM, seldom played. Groove wear and damage is a... 
ZYX R100 Yatra
Thank you, I've owned Zyx in the past. I enjoy their cartridges as well. 
ZYX R100 Yatra
Any preference or further thoughts? 
ZYX R100 Yatra
Syntax have you ever compared UNIverse 1 with XV-1s? 
ZYX R100 Yatra
I think most of the variables are the same, it's that too much time has passed between hearing both that I can't really expand more than that. Both of them do have a nice solid sound, without the whispy-ness of some MC cartridges. 
ZYX R100 Yatra
I've never compared them side by side. I've only heard them in a familiar system at different times. 
ZYX R100 Yatra
I have owned a couple of Zyx cartridges, your findings are similar to mine. I would try a Soundsmith Hyperion or Sussuro (I am not a fan of the strain gauge). They give a very nice fleshed out sound, and do not have the high frequency tilt of some... 
VPI Direct Drive Turntable
HW says it is a $4000 part, is that really the price from ThinGap? 
Wood armwand vs Metal armwand
With speakers, the good ones usually try to make the fact they use wood a non-factor; try to make the enclosures inert. And not have the wood try to be part of the signature of the speaker, that is adding its own resonances to color the sound.